Raceland induction

[b3lly44]

Hi all. Just orders the raceland induction and was just after fitting help.
Thanks
Chris

[saxova]

Pretty straight forward mate.

Take old airbox off, screw new one on.. Then either make up some small 90 metal clips and screw the enclosed bit to the slam panel.. Or drill a hole and zip tie..

So basically just attach the enclosed bit to the slam panel so it doesn't rattle about.

And if the elbow has a hole in it, connect the breather pipe.. Or run a oil catch tank / filter.

[b3lly44]

So the enclosed bit is the hardest bit.

Thanks for that mate

[b3lly44]

Also the oil catch tank. Do I need the tank or just the filter?

[saxova]

One or the other.