Coolant hose identification

[0110craig]

Does anyone know what this is from? Vts/vtr/furio
http://i906.photobucket.com/albums/ac270/0110craig/47f46f37.jpg

[kennym1987]

could be vts as the end that goes on the radiator looks short?

[0110craig]

could be vts as the end that goes on the radiator looks short?

That's what I was thinking.. It looks to short for a vtr and I ain't a clue what a furio hose looks like.

Anyone confirm this? Or know measurements or the Vts hose?

[Stefan_Wood]

Well its not a furio hose, but dont suppose you could measure the diameter of it for me inside to inside and outside to outside thanks :)

[0110craig]

Well its not a furio hose, but dont suppose you could measure the diameter of it for me inside to inside and outside to outside thanks :)

The inner is 30mm outter 38mm

[jeffchiz]

Looks like it fits the bigger rads so either vts or a later vtr with the bigger rad

[croftys]

looks like a bottom hose,just done a head gasket on a 1.1 and it looks the same as the one i have,the lower black clip attatches to the body in the wheel arch....hope this helps.gazza

[Stefan_Wood]

The inner is 30mm outter 38mm

Thanks a bunch

[0110craig]

looks like a bottom hose,just done a head gasket on a 1.1 and it looks the same as the one i have,the lower black clip attatches to the body in the wheel arch....hope this helps.gazza

Cheers mate, yer there a nightmare to change on the 16v lumps, had to remove the inlet today just to be able to get the old one off, to find the new one (pictured) does not fit, it's about 8 inch to short!, so I'm Thinking it could be off a mk1 Vts :(
Does anyone know if they are different?
I've got a silicone set but it's in 2 pieces the lower hose, but I need a connector to join them, but I can find one anywhere!

It's always the little jobs that turn out to be a headache!
Craig

[kennym1987]

Cheers mate, yer there a nightmare to change on the 16v lumps, had to remove the inlet today just to be able to get the old one off, to find the new one (pictured) does not fit, it's about 8 inch to short!, so I'm Thinking it could be off a mk1 Vts :(
Does anyone know if they are different?
I've got a silicone set but it's in 2 pieces the lower hose, but I need a connector to join them, but I can find one anywhere!

It's always the little jobs that turn out to be a headache!
Craig

remove the inlet...

just jack the car up?

[0110craig]

remove the inlet...

just jack the car up?

The car is currently not transportable lol and jacking it wasnt a option. But it would of been a hell of a lot easier though.

[danny-vts]

thats off a vts, took mine off plenty of times when i had the saxo

[0110craig]

thats off a vts, took mine off plenty of times when i had the saxo

I thought it was Untill I remove mine of a standard 03 Vts, to find this is shorter than the standard!

I've got a silicone set now however it's in 2 pieces, what can I use to join them?, any ideas?

[danny-vts]

strange :/
you would need a joiner or what ever they are called , with 2 clamps/jubilee clips