View Full Version : race wiring loom
solvi
13th February 2012, 11:55
hi any one have made your race wiring loom??
im painting my car on indigo blue, and the are alot off wiring at engine bay!!!
i wollld like to cut them off...
anyone have already simplified a loom for the saxo??
thanks!
I´m not a l-plater anymore...now i´m infrequent poster..THANKS.
lolol BRUNO
Alex
13th February 2012, 13:39
Standard ECU?
Sandy does race looms for the DTA, not sure if he does for others but worth giving him a try.
mark1311
13th February 2012, 16:22
i have an auto sprky work for me, hes rebuilding our entrie looms using muilty core cable and using the orginal pin, will find some pictures.
solvi
14th February 2012, 20:13
thanks for the info....next week will start mouting the engine...will give a look at the wiring think...
slammed106
15th February 2012, 21:02
It depends how extreme you want to go..
If its just a thin out of the std loom and re-wrap then a few hours with a wiring diagram should be enough..
Mines currently away having it all remade as the stalks have all been ditched and im running a digital dash and im useless with electrics!!
Jungle
16th February 2012, 08:59
I'm confused what are you asking?
Can you cut unnecessary wires? YES
Can you rip everything out and have a custom loom made? YES
axsaxoman
16th February 2012, 09:30
is this road car -does it need lights .heater ,dash lighting etc
or pure race car ecu loom +charging circuit .
i see you are from portugal --I,m sure a car electrican can make up what you want
solvi
16th February 2012, 23:00
its a tracl only car...no head lights,etc it whould be easyer if i get a pre assemble one.
i just nead a lighter and easy lomm....i gone try to cut the wires by myself.
tnx
AlexFocusST
20th February 2012, 05:55
Is it worth it thought?
I would guess it's not , if you only want to take out light and indicator wires.
Personally i'm going to move all fuses in car , move battery to rear and tidy up the engine loom by removing the crash sensor barrel ( dont know how its properly called ) and placing main cut out switches
solvi
9th March 2012, 00:29
hello , i nead help..
in the painting process i took all wires out ,mouted all again but the car dont start,
i see a indicator on the dash whith a key!! imobilizer!
and now? there are a way to bypass yhe imo??
i dont nead key in this car anyway...
thelooneytuner
14th March 2012, 18:26
It depends on how far you want to go matey. I spec looms up to match people's needs. I'm currently doing one on marks and have multicore on the internal looms.
This makes everything neat and tidy.
Plus I use new pins on the origional plug so everything looks "made for"
solvi
15th March 2012, 19:50
i ve managed to do it myself....bean working on the car for the last says !
still not starting but has a lot off wire mods ive relocated the ecu and fuel pump relays.
http://i1229.photobucket.com/albums/ee466/solvilight/210620101446.jpg
vBulletin® v3.8.2, Copyright ©2000-2024, Jelsoft Enterprises Ltd.