PDA

View Full Version : Humour me..


YourDreamGirl
28th February 2012, 08:27
As above, humour me for the retarded question.

The fuse box cover under the bonnet (not inside of car). Can this come off for me to spray it? I tried yanking it but didnt want to pull too hard incase I rip it off.. Havent got time to replace any broken off yanked bits hence the question :y:

NismoSteve
28th February 2012, 08:30
I think there are a couple of clips that you need to gently pull outwards, around the edges. then it just pops off.

YourDreamGirl
28th February 2012, 08:31
So a bit like the ECU cover? Awkward as feck but does come off?

NismoSteve
28th February 2012, 08:36
Not sure about the ecu cover, but you can see the clips on the fusebox cover, there are at least two, one on the left side and one on the back. Should be quite simple to remove. Maybe a flat head screwdriver would assist you, just be gentle.

YourDreamGirl
28th February 2012, 08:42
Thanks man :y:

jayline
28th February 2012, 09:49
it is like the ecu cover :) just be careful as i snapped a hidden one :(

DanTvts
28th February 2012, 10:09
It's on a hinge. 2 clips and then its hinged. Connected to the rest of the fuse box iirc.

marcusd
28th February 2012, 10:23
no its not it has a screw at the bottom of the box. take all the wiring and plastic out and u will see a screw on a washer

DanTvts
28th February 2012, 10:24
no its not it has a screw at the bottom of the box. take all the wiring and plastic out and u will see a screw on a washer

This is kind of what i was trying to say, its one piece basicly. Pretty sure theres 2 8mm bolts holding it onto the inner arch.

saxova
28th February 2012, 10:49
no its not it has a screw at the bottom of the box. take all the wiring and plastic out and u will see a screw on a washer

This. :y::y:

YourDreamGirl
28th February 2012, 11:10
Oh right, so you have to take the whole thing off, not just the cover? Cause I found the screw youre talking about but was unsure if they were two seperate pieces or not :y: