Dom's Peugeot 106 Rallye Progress!

[Dom]

The Start of something good!

Hello Saxperience!

I'm back again with another 106, third time lucky eh ;)

Well, some of you may recognise it as Chris's off here. I have to say I am very impressed with the way it drives, the way it pulls through the gears and my god that exhaust tone! Few minor dings here and there, but nothing to even batter an eyelid at when opening the throttle up :y:

Apologies with the pictures, they are off a crappy blackberry.

http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDAzMTgtMjAxMjAzMDMtMDAwMC5qcGc.jpg

http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDAzMTYtMjAxMjAzMDItMjEyOS5qcGc.jpg

and the spec copied over from the FS Thread;

Engine/transmission
16v engine (covered roughly 80k)
Kent pt51 cams
Predator ecu
14point7 SLC pure plus 2 wideband lambda (with receipt for £223.99)
Piper heat wrapped manifold
OMP Inox group a exhaust system
BMC CDA filter
Jp4 rocker covers with carbon coil pack cover
Vibratechnics fast road upper engine mounts and race lower
S2 rallye gearbox
New clutch and gear linkages fitted at same time as gearbox
B&M quick shift

Suspension
Bilstein group n front shocks
Faulkner custom 175lb 240mm free length springs
Pugsport group n top mounts
Front upper and lower strut brace
Polyrace wishbone bushes
Powerflex black shore 95 ARB bushes
Poly race rear beam bushes
Gaz adjustable rear shocks
Rebuilt rear beam
Lowered approx 35mm all round

Brakes
266mm brakes
New discs and pads roughly 2 months ago
All new calipers

Interior/exterior/chassis
Speedline comp2 wheels in white
Uniroyal rainsport 2 tyres (only seen 8k with proof)
Omp Corsica replica steering wheel from rally design
Wideband gauge on lower part of dash by steering wheel
Smaller aerial
De wipered with the proper parts
All brand new rallye decals
Also treated all under the rear of the car and all 4 arches
2 new headlights

Well, that's all for tonight, I have to get some daylight pictures of it!

Comments and Criticism welcome, lets see how far I get with this one in the next 12 months!

[Viper]

Looks nice, I've always liked these!

[Cam]

One shed to another... Lol joking looks good mate :y: best of luck with it!

[Baz]

very nice mate, looks mint :) onwards and upwards!!

[rey]

Looks very nice.

Have a rather large soft spot for valvered rallye's.

[D--R--E--W]

See that WAD of cash... was it 3k?

[JoshB]

Is this actually a progress thread? There's nothing left to do! It looks lovely.

[kennym1987]

shaweeeet :p

[Karlb1]

Not yellow enough.
On a serious note,i like it. A lot.
see it onsunday?

[dc1984]

that looks very tidy mate, good investment;)

[Tom5190]

That looks really good mate!

[MiniGibbo]

Nice rallye, needs the steelies back..

[Ashleyp]

Proper nice that, get detailing ;)

[AlexB]

What happened to say hi when you collected this you gay?

You know what i think about the car :y:

[blackie_2k5]

Bought a great car there mate, if I had the funds I would of snapped that up :y:

[Yates]

think its the only type of 106/saxo id own again, but it would have to have bodies, i mean its got a stand alone and cams already.

put as gibbo says, needs steelies back on it

[Jay_]

Lovely! It is gagging for bodies though....! Fingers crossed with this one! :y:

[Domster]

Looks good mate! Hope this one will give you better luck!

[miamibluebaby]

Good spec to start with, and a easy base to build on nice motor tbf :D

[K17NEY]

Very nice Dom, They're the only wheels an S2 can pull off. I prefer them on Steels though

[GazWatson]

Love the look of this car :D

[josh11490]

Love white rallye's :p im sure this will be as good as your nana was!

[vts-dave]

love this car Dom i was going to buy it lol, if you go back to steelies PM me i want your speedlines haha

[Sophia_Bush]

needs bodies be rude not to

[logic_guy]

needs bodies be rude not to

What he said ;)^^

Very nice car Dom, looks the tits in real life tbh.

I was thoroughly impressed with the amount of power it has. It feels like it just doesn't want to be driven slowly. It pulls like a train and the handling is absolutely fucking fantastic. It sounds the part too. :y:

[Dom]

See that WAD of cash... was it 3k?

Indeed somewhere around that figure, was lovely to hold WAD.

Is this actually a progress thread? There's nothing left to do! It looks lovely.

There's a lot of bodywork to do, noticed a few bits today i'd like to change a little, may as well get it resprayed :homme:

Not yellow enough.
On a serious note,i like it. A lot.
see it onsunday?

Indeed, lets hit the back lanes.

Nice rallye, needs the steelies back..

Never ever ever put such a ludicrous suggestion on this car ever again, are you serious? Steelies are wank :A: haha

What happened to say hi when you collected this you gay?

You know what i think about the car :y:

Told you to give me a shout if you're around :P

think its the only type of 106/saxo id own again, but it would have to have bodies, i mean its got a stand alone and cams already.

put as gibbo says, needs steelies back on it

Bodies yes, steelies no.

Personal preference, but the car is a hell of a lot of fun. Bit loud, but worth it!

Very nice Dom, They're the only wheels an S2 can pull off. I prefer them on Steels though

Third person that's said that now :n: Nobody like alloys? Was going to smash on the Ultraleggera's.. Hmm

Love white rallye's :p im sure this will be as good as your nana was!

Cheers pal! Hopefully expect another mini build like that :A:

love this car Dom i was going to buy it lol, if you go back to steelies PM me i want your speedlines haha

Aha, oh its awesome, sorry to rub it in ;)

needs bodies be rude not to

It would be wouldn't it. ;)

Now where did I leave that compensation money, oh Haiiii ATPower.

[parry121]

nice rallye dom :)

[Nates-VTR]

Saw one of these for the first time the other night looked identical to your exterior, very very nice, I think the steels would look good but it looks great ATM, want to see pics of the interior plz xD red rallye carpet ftw!

[MiniGibbo]

Saw one of these for the first time the other night looked identical to your exterior, very very nice, I think the steels would look good but it looks great ATM, want to see pics of the interior plz xD red rallye carpet ftw!

Its an s2 itll have a blue carpet.

[Nates-VTR]

Its an s2 itll have a blue carpet.

Then which ones have the red? I wanna try source one for wicked red r :P

[Simon0014]

Then which ones have the red? I wanna try source one for wicked red r :P

S1 rallyes, but they're rare as rocking horse shit!

Dom saw this in the FS section and could only wish I had the money for it! Such a nice motor! I wish you all the best of luck with this one :y:

[Dom]

General Check Over..
Not that bad..

Had the Rallye over the pit this afternoon to check the underside for general rust and other bits and bobs. Got to say, I'm quite impressed! A bit of welding needs to be done here and there, Front Pan's and Rear arch, but its only what I knew was there when I bought it, and Chris was completely honest with me when selling it :y:

Oh well, no trouble. First plan is then, getting the welder out and sorting the underside and Arch. The rest of the work on the car was up to a top standard, very impressed with the work previously gone into it!

Picture of today's small amount of events;
http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDAzMjctMjAxMjAzMDQtMTYyNS5qcGc.jpg

As for plans for the car, nothing. Literally, taking every day as it comes and seeing what I feel like at the time, then the mods start. Very impressed after the first few days, engine runs sweet and the fuel economy is stupidly good, almost as good as my friends 1.1!

Comments and Criticism welcome :y:

[Beaniemoo]

There are quite a few Rallye's in our region now, once mines on the road we'll have to arrange a meet!
Loving the new car (though Rallye's should have steels, I shall be going out of my way to keep the steelies on mine lol)
If you decide to fit bodies and need help, advise, or them fitting let us know xxx

[luk3matth3ws]

Was it you that flashed me ealier between willington and the bypass roundabout?

[Dom]

There are quite a few Rallye's in our region now, once mines on the road we'll have to arrange a meet!
Loving the new car (though Rallye's should have steels, I shall be going out of my way to keep the steelies on mine lol)
If you decide to fit bodies and need help, advise, or them fitting let us know xxx

They seem to be more popular than GTi's now! 8v ftw eh ;)

I'd really have to sit in a dark room for hours and hours to even slightly be convinced to put on steelies on this, I don't think I can, I want my Ultraleggera's on it, very unsure though :wacko:

One day soon about the last bit :) I'm spending money on tools and the minor bits before skipping the small bits and splashing out the cash on the big bits. Plus an insurance payout. :wall: lol

Was it you that flashed me ealier between willington and the bypass roundabout?

I didn't flash? I get what you mean though, my suspensions that solid that you ain't the only one who thinks I flash, a guy in a Pink 106 a few cars ahead of you looked at me weird as well haha.. Wondered why I kept getting looks.

Yours the Silver VT* then?

[Beaniemoo]

Not a fan of 8v's as a rule lol! (yours is a valver also isn't it?)

VTR = not a fan
S2 Rallye = quicker than a VTR but still not a fan
S1 Rallye = EPIC!!!

Lol, as I said, we're fairly local so if you're even in doubt or need assistance, feel free to drop us a line as we love to help

[luk3matth3ws]

Lol yeah mines the silver vtr

[Dom]

Not a fan of 8v's as a rule lol! (yours is a valver also isn't it?)

VTR = not a fan
S2 Rallye = quicker than a VTR but still not a fan
S1 Rallye = EPIC!!!

Lol, as I said, we're fairly local so if you're even in doubt or need assistance, feel free to drop us a line as we love to help

Depends who's asking if its an 8v ;) LOL Yeah its got a lovely 16v.

I will do, I have got a few little bits I need to ask you guys, but at this point in time a respray isn't something I could really shell out on, have to wait and see what insurance brings along.

Lol yeah mines the silver vtr

Ah reeet, you popped along to a few of the local meets yet? Got a rolling road day soon, Check the CC Section :)

[Dom]

Smallish update
Slimline Rad Installed..

Had the Rad laying around from the Yellow GTi, took a look at the Rallye's and thought I may as well change it over. So today I cracked on and removed the old one and put the Slimline one in, and bled the cooling system. Pretty sweet tbh, no major changes today :)

Old;
http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDAzMzgtMjAxMjAzMTAtMTgyMi5qcGc.jpg

New;
http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDAzMzktMjAxMjAzMTAtMTkyMC5qcGc.jpg

And the Bay overall;
http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDAzNDAtMjAxMjAzMTAtMTkyMC5qcGc.jpg

Its still a pretty epic car to drive, surprised I haven't got bored of it yet.

One for the day;
http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDAzNDEtMjAxMjAzMTAtMTkyMS5qcGc.jpg

Pretty successful day, repaired Karl's beam and Alternator, these French tins are pretty fun to work on!

Comments and criticism welcome as always!

[Sophia_Bush]

domo kun you need bodies asap listen to parrys video of his when it is up

[ed-bradley]

OMP System! :D

Welcome to the elite. hur hur

Sound the fucking nuts don't they!

[bobertmate]

Rallye ftw! Specially a 16v'd one ;)

I agree on the fact that these French tins are fun to work on too :P

Keep it up mate :y:

[Dom]

Pointless Weekend Update
Really is pointless.



Trying to update this blog every weekend I can, well this week nothing has been done. I did do a test on what the MPG its doing though, and was pretty impressed at 354+ motorway miles before I was playing chicken with the red light. Pretty good sitting at 70mph.

At the moment i'm struggling to get around a Alternator problem, its nothing major at all, and I really couldn't give a toss about it. Spacing issues. :homme:

Plans for the next week, well, clean it for a start. It's got dirty, done nearly 2k miles since I got it, and it hasn't met a hose pipe, yet! Also spray and fit the fuse box cover. Oh the joys. :n: Suppose that's what happens when I buy a nearly done project, everything from here gets expensive. Forged, Bodied Engine saving fund commenced as of Thursday.

Bay pic;
http://i29.photobucket.com/albums/c300/AvP_Mich/Domgti/IMG_7746.jpg

Driveway pic;
http://i29.photobucket.com/albums/c300/AvP_Mich/Domgti/IMG_7739.jpg

Most of the work this weekend was concentrated on Mikol's car, which pretty much self imploded, see the start up video on 106owners :A:

Comments and criticism welcome as always.

[Dom]

Welding the Shell..
Actually done right this time..

Its the weekend, meaning more bits and pieces were done on the car. This weekend was the welding of the rear arches, rusted a bit worse than quite a few people expected. Pokey pokey with a screwdriver during the week meant that it needed doing, silicone sealant repairs wasn't adequate enough for me.

Oh hai, where the fuck did you appear from?
http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDAzOTctMjAxMjAzMjUtMTIxNC5qcGc.jpg

http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDA0MDAtMjAxMjAzMjUtMTIxNi5qcGc.jpg

http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDA0MDEtMjAxMjAzMjUtMTIyMS5qcGc.jpg

Rust has been taken out, plates have been welded in, Kurust etc, just needs a bit of tidying up and I will post up the pictures of the done job. Pretty happy with it tbh.

Comments and criticism welcome as always.

[AlexB]

welding rust holes???
nice to see no fibreglass this time lol

with the last little bits of tidying this thing will be a very nice motor

[biggiddystyle]

did you get it neat and tidy mate or is that a job for next weekend?
i locked my workshop keys inside the workshop when we left.
had to get security to let me back in.

[Dom]

did you get it neat and tidy mate or is that a job for next weekend?
i locked my workshop keys inside the workshop when we left.
had to get security to let me back in.

Nah I went to sleep after posting this, didn't bother getting it neat. Job for one evening during the week :)

That's a pretty shit thing to do now isn't it lol.. You disrupted him planning his next move on the London Underground :homme:

I definitely get what you mean with the smoke now, since earlier I had full oil on my gauge, now its near the bottom, I think its shat a piston ring somewhere.

[biggiddystyle]

did seem a lot of smoke tbh,
sure it'll be fine just dont drive too hard.
yeah, he weren't happy. oh well, he gets paid to do the job.
how about we start the jp4 rebuild.... just in case

[Dom]

Oil seems fine today, maybe because I took it for a shot in the cold caused the smoke.
I drive like a granny, all will be good.

Can do, the heads built up, need a set of tasty cam's and i'm away. Headgasket and Cambelt kit also, need to troll fleebay for some good prices.

[Dom]

Today I bought..
283mm GTi6 Calipers.. Do I? Or Don't I?



No chance in Rallye Steels going on if these get fitted.. :homme:

http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDA0MjUtMjAxMjAzMjktMTgyMi5qcGc.jpg

Also got the OZ Ultraleggera Alloys Refurbed.. Shame they are getting sold tomorrow, quite like them now they look fresh.

[joe333]

OH MY GOD, sell me that exhuast i want it soooooo badddd, ill trade for a pugsport and cashhhhhhhhh!

[RyanSaxo]

so so so so sosososososososos nice!

I loved the yellow one, this is just on another level!

[Gabbastard]

White S2 rallyes look awesome. I tried for ages to find a nice 106 GTi in white with no luck.

If you have a lockup/garage, get it up in the air and cup-brush the underseal off each wheelwell, youll probably find scary bits of rust starting underneath at certain points. Clean it all off, give it a good basecoat and then some thing decent like wurth underseal.

w.r.t. the alternator problem, get a VTR alternator bracket and belt,and mount that in the block. It'll sit the alt lower down well away from the manifold so eliminating any potential heat issues, and it makes changing belts and tensioning 10x easier.

[W343NNA]

Smallish update
Slimline Rad Installed..

Had the Rad laying around from the Yellow GTi, took a look at the Rallye's and thought I may as well change it over. So today I cracked on and removed the old one and put the Slimline one in, and bled the cooling system. Pretty sweet tbh, no major changes today :)

Old;
http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDAzMzgtMjAxMjAzMTAtMTgyMi5qcGc.jpg

New;
http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDAzMzktMjAxMjAzMTAtMTkyMC5qcGc.jpg

And the Bay overall;
http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDAzNDAtMjAxMjAzMTAtMTkyMC5qcGc.jpg

Its still a pretty epic car to drive, surprised I haven't got bored of it yet.

One for the day;
http://i765.photobucket.com/albums/xx294/Domleydon/utf-8BSU1HMDAzNDEtMjAxMjAzMTAtMTkyMS5qcGc.jpg

Pretty successful day, repaired Karl's beam and Alternator, these French tins are pretty fun to work on!

Comments and criticism welcome as always!


OH did you really what did you do then pal ? because youv made an absolute balls up of it if you had anything to do with fitting the 24mmARB or even tightening any bolts up. would advise you dont touch beams in future

Sorry to sound so agresive but its my life that i was trusting in a car that somone els had bodged.

Nice rallye btw.

[D4MJT]

OH did you really what did you do then pal ? because youv made an absolute balls up of it if you had anything to do with fitting the 24mmARB or even tightening any bolts up. would advise you dont touch beams in future

Sorry to sound so agresive but its my life that i was trusting in a car that somone els had bodged.

Nice rallye btw.

Angry noises!

If you buy a modified car you buy someone elses modifications. First thing I'd do is give everything a good check over to make sure I was happy with it, why trust other peoples work? I make mistakes, I expect others do!

[Dom]

OH did you really what did you do then pal ? because youv made an absolute balls up of it if you had anything to do with fitting the 24mmARB or even tightening any bolts up. would advise you dont touch beams in future

Sorry to sound so agresive but its my life that i was trusting in a car that somone els had bodged.


How fucking dare you. You absolute twat.

That ARB was not a bodge at all. The Previous owner of the beam must have been having major issues, when it was put on Karl's car, it knocked all the time due to that ARB end plate being smashed on by a cunt.

The Arb was removed, end plates checked over and the ARB was almost fubar. Hence the reason for the fucked beam suspicion I was talking about, when we put it back together it went on too easily, due to the splines on one side of the ARB having severe spline damage.

The repair worked, the beam stopped knocking over every small bump in the road. No more was said about it after that. You've bought the car, its your problem, not Adam's, mine nor Karl's problem. Do not ever come spouting your fucking mouth on the internet.

How can you even say that we fucked that beam? and we don't know what we are doing? I've been working on these cars for 2-3 years myself, beams included, I'd say I've done 6-7 beams without any trouble at all. This is the only one I had a suspicion about.

See you at FCS. Bellend.

Ps. Don't poke the rear arches.

[DeanAngell1234]

Love this car mate!

[Prickle]

Jesus! shits hit the fan!

[Mikol]

Btw this car has a new progress blog on boners by the new owner - Linky (http://www.106owners.co.uk/forums/showthread.php?227076-Owen-s-Bianca-Rallye)

Also, my beam hasn't fallen off yet. Nor has it exploded or disintegrated.

And as far as I know neither has the other beam Dom & I did together. They're pretty simple things, bless them. If anything's gone wrong it's likely a mechanical fault that's been there the whole time, especially if the beam was just transplanted from one car to another. Beams don't just die overnight.

As an aside, I dare you to try and find a mint beam. These cars are all between ten and twenty years old now, even at a conservative rate of miles none of them are as good as they were from the factory. Stirring up a hate-train across at least three threads about a common fault that you were already aware of says more about your own attempt to ride your luck instead of actually doing something about the problem.

[Saxocupiv]

nice project : Y:

[saxo-parts]

OH did you really what did you do then pal ? because youv made an absolute balls up of it if you had anything to do with fitting the 24mmARB or even tightening any bolts up. would advise you dont touch beams in future

Sorry to sound so agresive but its my life that i was trusting in a car that somone els had bodged.

Nice rallye btw.

Spamuel, please get over yourself,dry your eyes and pick your bottom lip up. Its a rear beam, not like you've found Dom and Karl tag-teaming your mum is it? It's easily fixed, if you found a naffed beam on a £5k car i'd understand but in all honesty, I've paid as much for breakers in the past.

[blackie_2k5]

Tbh you got the car for a significant amount less then it could be split for in parts

Even if the car had no floor pan or the axle fell off

Youd still make a tidy profit on what was left

[Dom]

Well this thread turned bad. Oh well.

I will have the last laugh.

Ha.

[DreamEater]

My advice would be for everyone to buy tickets to FCS, it could be better than Haye and Chisora...

[Karlb1]

Hmm..this is dom's proggy thread, if we all wanna bitch about or defend my old car, can't we move it to my old proggy thread? If not, ah well, I know its keeping me and dom amused

[Dom]

Like I'm bothered lol, this car was never my project but Chris's. If this was branded on the Yellow GTi's page then yeah I'd have no choice to Hayemaker the cunt. No matter how many boyfriends he brings to FCS I'd still like to have a word.

[jayline]

love the rallye mate! shame about some arseholes on here spoiling a good thread! id love to nut him as he got a tidy car for fuck all when i would of had it even with a "knackered" beam anyways!! what do you see yourself doing next to this?

[Cam]

love the rallye mate! shame about some arseholes on here spoiling a good thread! id love to nut him as he got a tidy car for fuck all when i would of had it even with a "knackered" beam anyways!! what do you see yourself doing next to this?

He dont even own it now. Lol

[jayline]

He dont even own it now. Lol

so he sold it on now! what a complete bellend! wish i was going to FCS just to just call him a complete cunt to his face and laugh at his stupidity! cam can you unlock ecu's?

[Cam]

so he sold it on now! what a complete bellend! wish i was going to FCS just to just call him a complete cunt to his face and laugh at his stupidity! cam can you unlock ecu's?

I can indeed dudeeee