Centre Bore Measurement??

[BenWest]

Hi guys ive got a new set of alloys and need to know what centre bore they have so I can buy the correct spacers!

Where or how can I find this??

Thanks!

[scottie_436]

65.1mm ;)

[scottie_436]

oh shucks... thats the citroen standard centre bore..opps

what make of alloy are they??

[Ben_SaxoForte]

Have a look on the inside of the wheel where it meets the hub of the car, sometimes has the bore size written there, if not what wheels are they? someone may be able to tell you on here if they have the same:y:

[BenWest]

How will the measurement be displayed??
They are black hijorn racing series(HRS) 15" alloys.

Thanks guys!

[BenWest]

Anyone??

[Baz]

just get the tape measure out and measure it....

[BenWest]

I did think of that but would that be accurate enough??

[BenWest]

These are the ones!
http://www.madmotors.co.uk/alloy-wheels/hrs/15/hrs-h286-black-red-lip-15-inc-tyres.html

[scottie_436]

you need to know the centre bore and the offset of the wheel... if its not a direct fit citroen/peugoet wheel

Having a quick search... all the wheels of the make you say they are seam to be a et40 offset in 15inch and the correct 4x108 bolt pattern

So you will need a 20-25mm thick spacer to bring them to the correct et15 - et20

a common centre bore for after market is 73.1..... see if they are about that?

[BenWest]

Thanks, yeah i know the offset etc just need centre bore!

Ill try that man!

[scottie_436]

These are the ones!
http://www.madmotors.co.uk/alloy-wheels/hrs/15/hrs-h286-black-red-lip-15-inc-tyres.html

ok so did you order them as for a saxo?? are they correct other than they aint a tight fit in the centre?

[BenWest]

Yeah its pretty close to 73.1!
Reckon it would be??

[Baz]

i would say so matey, buy some spacers for saxo and use some spigot rings