immobiliser

[adamspencer]

where is the immobiliser box so i can take it off, obv whilst engine is running. Unlocked ecu and all that jazz, but underneath the passenger glove box i cant see any obvious box. I removed the fuse panel on the passenger side and i can see a wide 16pin connector that is empty. Has it already been removed from there then? The immobiliser light is flashing constantly, but cos i got a standalone ecu it still starts and runs etc. And help would be appreciated because the haynes manual basically cuts out any immobiliser tips incase criminals use it :/ thanks

[adamspencer]

all i can see is a little box danging on a wire which looks sorta like a double relay, like the one under the ecu tray, which is black. i tried uploading a picture but i dont have a website to upload it to to post a link, and i cba making one just for this

[mcjacko1987]

http://i1101.photobucket.com/albums/g432/mcjacko1987/DSCF0395.jpg
http://i1101.photobucket.com/albums/g432/mcjacko1987/DSCF0394.jpg
usually very well hidden

[adamspencer]

yeah this is what i saw, but i thought it was a relay, and obviously didnt want to start unplugging things without making sure. So i can just run the engine, unplug the box and the light should stop flashing?

[mcjacko1987]

yeah should do. run engine and unplug. turn engine off, back on and all should be fine mate.
the box is roughly the size of a pack of 20 fags most people say.

[adamspencer]

yeah it is about that size, which confused me cos other people kept telling me to look for a big box, but there wasnt any. cheers

[mcjacko1987]

thats the right one anyways buddy :y: