how to clean single pont injector

[andy1weir]

hey guys basically losing my rag with my saxo, still running like shit, lumpy idle ,losing power cutting out randomly etc

heres what i ve done so far

new air filter
new fuel filter
new coilpack
new spark plugs
cleaned throttle body
new driveshaft
clutch getting fitted tomorrow

so im wanting to clean the fuel injector as ive read that could also be a problem

is there a guide that shows you how to do it, can anyone poin me in the right direction?? i dont have a haynes manual so cant refer to that

[Bedford126]

Any chance you cleaned the idle control valve?

Only ever worked on one single point saxo and I took the inlet manifold off and cleaned everything in the parts washer and blasted it all through with brake cleaner. Solved the problem of shit running and bad idle.

[andy1weir]

i had the throttle body off, cleaned it , the idle control valve is the black bit attached to it?? has a little spring on it with a rubber housing around it?? if thats the icv then yes ive changed it lol

[Bedford126]

Not too sure mate I am not really familiar with the set up on the single point. It should have a 3 pin plug coming out of it. if you have cleaned it and still the same problem it could be worth finding a replacement then sending your injector away for cleaning/inspection at injector tune.

[kennym1987]

i had the throttle body off, cleaned it , the idle control valve is the black bit attached to it?? has a little spring on it with a rubber housing around it?? if thats the icv then yes ive changed it lol

thats correct mate. the black box is the stepper motor/icv. its a sealed box so all you can really do is spray the spring with wd40 or replace it