What is this and how to I fix it?

[Greedo]

Hi guys,

I have some kind of oil feed on my engine block that pops off slightly under driving, and leaks oil.

Can anyone shed any light onto exactly what it's feeding oil to and how I can fix it?
Have attempted Tiger Sealing it to the block, and the previous owner tried to use chemical metal to keep it in place - neither worked.

Cheers guys :y:

[Greedo]

http://img525.imageshack.us/img525/1869/p1000462a.jpg
http://img35.imageshack.us/img35/7531/p1000463t.jpg

[saxo_singh]

I think that's the breather pipe?

[Greedo]

I do have a oil catch tank, and the breather pipe comes off that.

Haven't actually been able to trace this yet - as it takes quite a complicated route around my engine bay

[Greedo]

The oil breather and catch tank come off the smaller diameter blue hose that's running left-right in the first pic. So definitely not that

[kennym1987]

its a breather. usually it would have a pipe going from it to the induction kit. when mine came loose i just wedged it in with the sealant and its never came back out

[Greedo]

What sealant did you use? Not having much luck with it!

[kennym1987]

can't remember now. hight temp sealant? thats what it was held on with before it fell off. the sealant that was stuck on the elbow, i just wedged in the hole first as i was putting it back on. my mate told me to use araldite but its been fine so far