ford alloys

[Vtrsi76]

evenin all...

would the alloys off a t reg ford focus fit on a r reg vtr? maybe with spigots???

[Baz]

would probs need spacers too

[Quick]

20mm spacers IIRC with longer bolts.

Also may need smaller rubber fitted!

[Brendan]

Ford alloys have a centre bore that is too small to fit onto the 106/Saxo hub, so you will either need to machine the bore out or get some spacers that adapt to fit so spigot rings will make things worse.

[Baz]

Ford alloys have a centre bore that is too small to fit onto the 106/Saxo hub, so you will either need to machine the bore out or get some spacers that adapt to fit so spigot rings will make things worse.

thought it was wider....my ford fitment alloys are wider than the saxo ones. both sets

[W343NNA]

20mm spacers and 5mm shims + 20mm spacers on the back depending weather you have drums or discs either way 20mm still a bit tight, iv got some mondeo wheels as winter wheels and 20mm spacers make them fit how ever if i could chose again id go possibly 30 so the wheels dont sit in as much

[mechsman]

I had focus aftermarket alloys on my 106. et46 and 17x7j, I needed 32mm spacers and they were bloody tight. Scrubbed on full lock and the front of the offside rear rubbed on the fuel filler neck pipe (made it leak eventually).