Airbag light

[Saxovch22]

So today i fitted my Omp Eco Buckets and now obviously my airbag light is on after unplugging the pretensioner.

what are my options to get rid of it as its an MOT fail, apart rom the resistor trick as i dont have access to a soldering iron ?

[Cam]

Buy one you can get for like £3...

[LSOfreak]

do the old resistor trick and just wrap the copper wire tight around the legs of the resistor if you cant solder them, and them wrap them with insulation tape. Or you don't want to do that, you can plug in the pretensioners and cable tie them under your seats which ive seen before. Seems a bit of a bodge so i'd try the resistor trick first.

[stevo67]

Can you not bolt the seatbelt pretensioners onto your bucket seats?Then you`ll have the correct connectors.

[Saxovch22]

I have harnesses so can't use standard seatbelt.
Going to do the resistor trick the way LSOFreak said

[LSOfreak]

might come loose, but if you wrap it tight it should be fine :)