alloys.

[Chris_T]

I have been looking at some alloys. and the ones i seen are pretty cheap like 250 for 3 stud. mostly they are like 400-500

Only problem they are 15 inch and the ones i got on my saxo at the moment are 13's is this a big problem ? will i need anything done

[ChrisJ]

What saxo do you have?

Edit: wrong section btw.

[TU-Tuning]

Yea wrong section but if its 3 stud its a base model i think, although i hear some westys have three studs. Anyhooyou wont have any issues with a 45 or lower profile tyre. You may get some rubbing with 50 pros on full lock i think.

[Chris_T]

What saxo do you have?

Edit: wrong section btw.

Saxo X 1.1i

MK1 i think? lol

and my bad sorry.

[Johnno]

yeah might rub at full lock, get 45 profile and you should be fine mate, is it lowered?

[and123rew]

just explained this to another guy on her. 3 studs was only on the base models (Flat back above the rear wheels) so you will more than likely experience rubbing at the back so you will probally have to either take it to a garage or do it urself and cut the lip off under the arch. that way when you have people in the back or go over bumps the wheels want rub against the lip!

garage do it for bout 50 pound, just ask around some body shops!

hope that helps m8 and as far as rubbing at the front on full lock you shouldnt have any problems as long as profile isnt above 50! if they 16 or 17 then you would, the vts wheel are 15 and they dont scrub on lock so you should be fine at the front!

[Chris_T]

Thanks i think im just gonna get some 13's now tho

thanks for the help.

[and123rew]

m8 why dont you just by set of 14's you want have any trouble with them look better than 13's to