2003 Icelandic Grey VTS - 266mm going on! Pics page 5 :)

[harry289]

Hello once again. Finally got 16v! First impressions are good. Can feel the bit extra you get with the extra valves, can also see the extra fuel consumption. But its all worth it purely for the sound!

As some people know it is Jamie's old car. Always loved it, always wanted it. Now it's in my driveway :) Now for the specification and plans

Engine
Saxsport 2" race/decat exhaust with Powerflex mounts
Raceland 4-2-1
Simota carbon enclosed induction

Suspension
Spax PSX 40mm kit

Brakes
406 v6 Brembo 4 pots
Drilled and grooved discs
Mintex pads
Front exact braided lines
23mm M/C
DOT 5.1 fluid

Transmission
Compbrake quick shift
Quaife gear knob

Wheels and tyres
White TD 1.2s
Toyo T1R fronts
Yokohama Parada Spec 2 rears

Misc
Carbon mirror caps
Carbon door pillars
Carbon ECU cover
Carbon fuse box cover
LED rear lights
Corbeau Boss seats, runners and subframes
Team Heko wind deflectors
Polished cam covers, custom badge

-----------------------------------------------------------------------

Plans
Seats are being sold for some normal VTS seats.
Buying a new head unit.
Compbrake is being sold.
Rear LED lights are being sold for standard MK2 rears.
Catch tank and E-tec strut brace are being sold.
Simota induction is being sold for standard airbox and K and N panel filter.
Spax PSX kit is being sold for Bilstien Grp N dampers front, GMC 45mm springs, B8 rears.
Brake set up being sold for a 266mm, fully braided set up, deleting ABS.
Got Kamracing gear linkages, full Powerflex bushes, stainless bolts/fixings to go on.
Got Sparco REV, Sabelt harness, OMP sidemounts and low subframe for track days.
Racing wheel going to be ordered.
Fresh number plates.
Full service and detail.

I was thinking of an exhaust change, running a CAT with VTS supersprint centre section and Kam racing rolled back box

Anyway hear are some pictures

http://i1046.photobucket.com/albums/b462/harry28991/P1010043.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010044.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010048.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010049.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010038.jpg

Comments and ideas welcome :)

[Gazer]

Is a nice looking motor tbf, but the plans sound good also :y:

[Jay_]

Personally I would change the rear lights & that's it! I think is car is awesome!

[craig180]

Like it. A lot!

This Jamie's old motor? Looks extremely tidy

[baker556]

Very nice alot of kit on that!

I personally wouldn't ditch the seats they are very nice.

[vtr-marc]

Very nice dude

[Craig_B]

Plans sound good! Always liked this car..

I agree with changing the seats, they look massive.

Good to see the car still on the forum!! As it disappeared from the site when someone from my way bought it!

[harry289]

Is a nice looking motor tbf, but the plans sound good also :y:

Yeah plans should make it a little bit better for my needs

Personally I would change the rear lights & that's it! I think is car is awesome!

Car's going to be used on track so most changes will be suited to that. Yeah rear lights will be changed :)

Like it. A lot!

This Jamie's old motor? Looks extremely tidy

Yeah it is. Its pretty tidy. Will give her a good detail and service soon :)

Very nice alot of kit on that!

I personally wouldn't ditch the seats they are very nice.

I have no need for the seats to be honest. Standard VTS seats are nice and I have my Sparco Rev to go in for track days

Very nice dude

Thanks. Most of the work is credit to Jamie

Plans sound good! Always liked this car..

I agree with changing the seats, they look massive.

Good to see the car still on the forum!! As it disappeared from the site when someone from my way bought it!

Thanks Craig! Do you ever miss your Ice grey VTR? That was pukka!

[Psummers]

Nice car

[beaver28]

Loved this car I was going to buy it off Jamie but decided not to. Plans sound good to!


Sent from iPhone using Tapatalk

[Gandi699]

Looks good so nice buy mate. You going for a satch shift or back to standard?

[Craig_B]

Thanks Craig! Do you ever miss your Ice grey VTR? That was pukka!

Cheers man. And yes I do, I text the new owner the other day and he is going to be selling next year. So asked him to let me know when he is, to see if i am able to buy it back.

Will keep an eye on this thread

[harry289]

Loved this car I was going to buy it off Jamie but decided not to. Plans sound good to!


Sent from iPhone using Tapatalk

I got it for a decent price. Just waiting for the locking wheel nut now.

Looks good so nice buy mate. You going for a satch shift or back to standard?

Baker BM quickshift I think :)

Cheers man. And yes I do, I text the new owner the other day and he is going to be selling next year. So asked him to let me know when he is, to see if i am able to buy it back.

Will keep an eye on this thread

You should definitely get it back! Was one of the best OEM+ VTR's about!

[Craig_B]

You should definitely get it back! Was one of the best OEM+ VTR's about!

Yeah just hope it's in the same condition as I sold it in. We shall see. My dad wouldn't be to happy with a VTS, a VTR and my clio 197 on the drive aswell haha

[harry289]

I had a 172 Cup and a Saxo VTR on my driveway once. Looked pretty cool :P

I do think Icelandic grey is the best colour. Got this car until April 2013 now so I may just stick with the Spax kit as it seems pretty good

[k2thecsaxo]

Looks great mate and plans sound good also although I quite like the seats how the are!

[harry289]

Yeah the seats are okay! Just standard VTS seats are OEM and more to my needs

[Jamie]

:sweetheart: needs a detail by the looks of her,

Treat her well dude and she will look after you, never had a single issue with her. :)

Tbh I've been quietly bitter about selling it for quite some time now as you know and had I have known she would have ended up off the site with numerous owners I'd have kept it. So I'm glad you have ended up with it as I know you're in to detailing and will treat her well :) (bar tracking cringe lol!)

I think them seats are alright if I'm honest not my first choice but they aren't bad looking and are certainly going to be more supportive than the VTS seats dude!

You have quite a few plans, forgetting my bias as the stuff was all my first choice it does generally seem a waste of time switching things around for little to no gains unless you have it laying around.

Anywhoo good luck with her, she's a beaut! I can't speak for what the last set of owners have done to her but under my ownership she was treated like a queen!

[Prickle]

Did you pay the 2.5k it was up for...?

[harry289]

:sweetheart: needs a detail by the looks of her,

Treat her well dude and she will look after you, never had a single issue with her. :)

Tbh I've been quietly bitter about selling it for quite some time now as you know and had I have known she would have ended up off the site with numerous owners I'd have kept it. So I'm glad you have ended up with it as I know you're in to detailing and will treat her well :) (bar tracking cringe lol!)

I think them seats are alright if I'm honest not my first choice but they aren't bad looking and are certainly going to be more supportive than the VTS seats dude!

You have quite a few plans, forgetting my bias as the stuff was all my first choice it does generally seem a waste of time switching things around for little to no gains unless you have it laying around.

Anywhoo good luck with her, she's a beaut! I can't speak for what the last set of owners have done to her but under my ownership she was treated like a queen!

Yeah got some of the stuff here that was going to be on the VTR I had. Just want it to be more my own in some ways!

Big detail is on the cards next week :) with a couple new products such as Iron-X and a new CG wooly mammouth towel. May make a detailing thread for it.

Then a good service!

I don't really drive fast on the roads mate so VTS seats will be better for me and maybe make a bit of money on the Boss recliners. Got my Sparco Rev and Sabelt 3" harness for track days.

Its on 73k miles now so its not so bad being tracked :P I'm pretty smooth anyway....mostly. lol

Did you pay the 2.5k it was up for...?

I didn't pay £2.5k no :)

[Prickle]

Its on 73k miles now



I didn't pay £2.5k no :)

Good lol.

Bah im on 75k and rollin fast..

Looks well. 03 VTS friend. ;) I followed Jamies thread on PT and it defo got looked after. lol.

[harry289]

Seems alright. Not had chance to give it a proper drive yet. Just the drive home from Wales. Used a tank of fuel though already. 356 miles and the light came on :\

Yeah I followed both on here and on PT but ack then insurance on a VTS was a big no no :(

Will try and get it back to, as close as I can, the condition it was with Jamie

I quite like these pictures:

http://farm5.static.flickr.com/4031/4532291288_c93bdfefed_o.jpg

http://farm5.static.flickr.com/4048/4532291310_0e177b0430_o.jpg

[Prickle]

Well you dont know how the prev owners after Jamie treat it tbf thats probs why you think "alright"

Whats it lowered again? i think i want it the same! xD

Mine can be abit greedy at times man.

[harry289]

I believe it has the Spax PSX 40mm kit. Very impressed with the kit tbh. Makes me think if a different set up is worth it.

[Prickle]

I believe it has the Spax PSX 40mm kit. Very impressed with the kit tbh. Makes me think if a different set up is worth it.

40mm front and back? interesting. Its how id like mine to sit ideally. Doesnt look too low or too high!

Will follow anyway mate. Good stuff.

[harry289]

Lowered so it all sits level. Ride height is just about spot on :)

[GazWatson]

nice little car, loving the alloys

[harry289]

Thanks mate

Just cleaned the air filter. I don't think it had been cleaned since first fitted by the looks of it!

See how she runs now!

[RyanSaxo]

wooooooooooo - another ice grey buddy.

Best colour!

Look forward to seeing its progress

[Jamie]

Thanks mate

Just cleaned the air filter. I don't think it had been cleaned since first fitted by the looks of it!

See how she runs now!

Definitely wasn't by me, was only on for around 4-6k and was still blue? iirc, last for sale thread I can find for it by me was at 57k, so it's done a load of miles since then doubt it will make that much difference though in terms of running unless it was in a real bad state lol but every little helps... :)

Should have got a before and after pic.

[harry289]

Yeah was black! And had half the welsh countryside in there too. She's bright blue now :) power delivery is noticeably smoother

[Bobo0907]

Seems alright. Not had chance to give it a proper drive yet. Just the drive home from Wales. Used a tank of fuel though already. 356 miles and the light came on :\

Yeah I followed both on here and on PT but ack then insurance on a VTS was a big no no :(

Will try and get it back to, as close as I can, the condition it was with Jamie


Lucky you!

Looks very clean, love the look on the td's. Whats it like for rust underneath?

[Cam]

If your going to get new seats at least get some GTI leathers would be a a worth while thing on a car like that!

[harry289]

wooooooooooo - another ice grey buddy.

Best colour!

Look forward to seeing its progress

Yeah its my 2nd Icelandic grey, 1st VTS though.

Lucky you!

Looks very clean, love the look on the td's. Whats it like for rust underneath?

Thanks it will be cleaner soon :) Rust? What rust? :P no rust there. Just a smidge of surface in the chassis leg in the bay which is being sorted asap.

If your going to get new seats at least get some GTI leathers would be a a worth while thing on a car like that!

Nah I'l just put a pair of VTS seats in. As above, I have my Sparco Rev for track days

Now looking for a new racing wheel. OMP or Sparco

[ZR_CH4Z]

Looks sexy Harry, still think you need to stick some cams in and get it remapped though :p

[harry289]

Nah no cams in my ownership I'm afraid mate.

[harry289]

Now half stripped with Sparco Rev fitted.

Those other seats are now sold. Would be on the lookout for vtr or vts seats front and rear.

Chis.

[harry289]

Finally got the locking wheel bolts out. Had 2 problems with these:

1. Previous owner had lost the key for them (Mcguard ones too :( )
2. The previous owner did them up ridiculously tight wish is always a big no no with any locking wheel nuts.

Anyway used my skills to get them off without causing any damage to the sexy Pro Race 1.2s :)

So tomorrow I can get the wheels cleaned inside and out, plus give the wheel arches a good clean also. Will do the underside too. How I love G101 :)

[B3N-RB]

nice motor :)

[ChAdS]

Lucks great Harry enjoy it mate. Try and keep this one alittle longer :-)

Makes me miss my icelandic grey R :-(


Sent from my iPhone using Tapatalk

[Craig_B]

Finally got the locking wheel bolts out. Had 2 problems with these:

1. Previous owner had lost the key for them (Mcguard ones too :( )
2. The previous owner did them up ridiculously tight wish is always a big no no with any locking wheel nuts.

Anyway used my skills to get them off without causing any damage to the sexy Pro Race 1.2s :)

So tomorrow I can get the wheels cleaned inside and out, plus give the wheel arches a good clean also. Will do the underside too. How I love G101 :)

G101 did wonders on my VTS's arches. Before and after pictures in my thread. Great stuff.

Shame about the locking wheel nut. I need to get a set to fit some R wheels to the S.

Look forward to cleaned wheel and arch pics!!

[harry289]

Lucks great Harry enjoy it mate. Try and keep this one alittle longer :-)

Makes me miss my icelandic grey R :-(


Sent from my iPhone using Tapatalk

Yeah that was a peach of a VTR! I'll try keep it a little longer :P

G101 did wonders on my VTS's arches. Before and after pictures in my thread. Great stuff.

Shame about the locking wheel nut. I need to get a set to fit some R wheels to the S.

Look forward to cleaned wheel and arch pics!!

To be honest with my old VTR I bought it cheap and it was filthy, although I saw its potential behind all the dirt and grease.

5:1 mixture on underside, engine bay, arches etc and agitated with various different brushes, came up wonders!

[Jazz]

I followed this car's progress closely since Jamie first bought it. He put loads of work into this and it really shows, stunning little VTS.

[BullockXR]

love it dude like the plans too! think i may have to invest in some white wheels for mine now ive seen the tds on here :D

[harry289]

I followed this car's progress closely since Jamie first bought it. He put loads of work into this and it really shows, stunning little VTS.

Yeah he did :) was a real minter when he had it. Not so much the previous owner. Found most nuts and bolts have been over tightened so I'm in the middle of checking and torquing up everything properly. Tedious.

love it dude like the plans too! think i may have to invest in some white wheels for mine now ive seen the tds on here :D

Yeah white wheels look really nice when clean. But that's the problem; keeping them clean.

I need to book a track day. Anyone else fancy Cadwell Park? :)

[beaver28]

I feel your pain on keeping white proraces clean! Had mine for over 3 years now and they have lost there gleaming whiteness :(


Sent from iPhone using Tapatalk

[harry289]

I'm unsure if Iron-X will revive them a little bit. Soon find out!

[harry289]

Had a cleaning session today. It had been left a while so bugs and brake dust had built up. Plus it was used on muddy B roads when it rained.

I had the arches, underside, engine bay, wheels, callipers etc cleaned and degreased before the car itself was cleaned, polished and sealed.

Now for some before pictures...

http://i1046.photobucket.com/albums/b462/harry28991/P1010063.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010064.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010065.jpg

Started off with my jack and axle stands to elevate the car a little.

http://i1046.photobucket.com/albums/b462/harry28991/P1010062.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010066.jpg

and removed wheels and tyres...

http://i1046.photobucket.com/albums/b462/harry28991/P1010067.jpg

at this point I decided to do one side at a time due to the uneven paving.

Arches were fairly mucky...

http://i1046.photobucket.com/albums/b462/harry28991/P1010068.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010072.jpg

but cleaned using G101 and a couple of arch/chassis cleaning brushes

http://i1046.photobucket.com/albums/b462/harry28991/P1010071.jpg

and the wheels cleaned inside and out using Bilberry wheel cleaner and a medium and small wheel brush along with my wheel cleaning mitt.

http://i1046.photobucket.com/albums/b462/harry28991/P1010070.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010069.jpg

first side done :)

http://i1046.photobucket.com/albums/b462/harry28991/P1010073.jpg

[harry289]

Same again for the other side...

http://i1046.photobucket.com/albums/b462/harry28991/P1010074.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010075.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010077.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010078.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010079.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010080.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010082.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010081.jpg

[harry289]

Car was washed using my Supernatural wash mitt, G101, detailing brushes, Chemical Guys Glossworkz shampoo and tardis.

Polished and sealed using AG SRP and FK1000p

http://i1046.photobucket.com/albums/b462/harry28991/P1010083.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010084.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010085.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010086.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010088.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010087.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010089.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010090.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010091.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010092.jpg

Then I got hungry so that's it for now :)

[manta]

Arches look very nice and rust free!

Which is a surprise for a sax!

[harry289]

Yeah lol. Underside and the whole shell is pretty much spot on! :)

[harry289]

In need of standard MK2 rear lights really. If anyone wants to swap with the LED ones then feel free :)

[Aaron]

i have a set of mk2 rear lights, you could of had them for free dude lol

[harry289]

Ahhh I forgot at the time :\

[elkoi]

This looks sweet mate (Y)

[Jamie]

Arches look very nice and rust free!

Which is a surprise for a sax!

Not your average shite that car lol.

Can't believe how dirty it was eeek :panic:, Looks much better now.

Tbh Harry I'm glad you got it. At least it's got someone who will look after it. Miss her! Who put those gay lights on? CRIMINAL lol.

[harry289]

Previous owner put the catch tank, Corbeau boss seats, e-tec strut brace, toyo t1r's and rear lights on.

Sometimes the rear lights look alright, but sometimes they look horrific lol.

Yeah she was dirty but all spanking clean now :) going to put another layer of wax on and some CG new look trim/tyre gel on next time.

Oh and there's some updates coming up sooon ;)

[timmythechef]

Them lights make me feel sick, whoever the previous owner was, someone needs to shit through their letterbox for the cheek.

Good cleaning sesh though.

[harry289]

Them lights make me feel sick, whoever the previous owner was, someone needs to shit through their letterbox for the cheek.

Good cleaning sesh though.

Yer lol. Also loads of bolts were over tightened all over the car. Had a day to torque everything up properly. Plus he lost the locking wheel nut he said he would send me.

All will be spot on soon though :)

[kane_15023]

Repair on the rear bumper and boot floor wasn't to bad either after being hit whilst parked by a BMW driver!! Atleast wasn't registered though, thanks to gibbs body repairs

[Jamie]

Repair on the rear bumper and boot floor wasn't to bad either after being hit whilst parked by a BMW driver!! Atleast wasn't registered though, thanks to gibbs body repairs

You fucking serious?

That's a cuntish thing to put in his thread aswell if so.

[harry289]

lol, no worries. Even if so the rear bumper is mint, boot floor is mint, everything is mint and spot on so nothing to worry about. If it was repaired the car is now better than it was out the factory.

[Jamie]

lol, no worries. Even if so the rear bumper is mint, boot floor is mint, everything is mint and spot on so nothing to worry about. If it was repaired the car is now better than it was out the factory.

I have a strong feeling he's talking bollocks tbh, signed right out aswell.

If it went through an insurance company, it would be written off.

When I stripped and detailed the boot it was in very very good condition I have a pic in my progress thread dude, take a look and see if you can spot any difference.

[Brettles1986]

Did you buy this from Chepstow by any chance, my boss owns Chepstow Motor Company and told me he had this in. I know it was up for a stupid price considering its a saxo.

[harry289]

Yes mate I did! I didn't pay the stupid price though.

[Brettles1986]

Out of interest how did you see it advertised?

[harry289]

Autotrader

[kane_15023]

Check the bumper still split

[kane_15023]

Car was off the road for 6 months being repaired, ye that's obvious that it would be written off, working for admiral got me a nice discount off repair price, you may notice a knocking when u hit a bump from front Aswell possible drop links.. Abs doesn't work either, n since your such a fanatic you may wanna c why all the lights are illuminated on the instrument panel

[lwigmore]

Car was off the road for 6 months being repaired, ye that's obvious that it would be written off, working for admiral got me a nice discount off repair price, you may notice a knocking when u hit a bump from front Aswell possible drop links.. Abs doesn't work either, n since your such a fanatic you may wanna c why all the lights are illuminated on the instrument panel

From what i've read, you haven't really looked after the car after you bought it from jamie?

Anyway, keep up the good work harry, looking like its good standard from when jamie had it :y:

[kane_15023]

No tbh your right, after it was hot lost interest that's why it was sold so cheap

[kane_15023]

Hit* lost interest

[moxy89]

lost interest now drive theee shittest car evert

[kane_15023]

Moxy u got a Saxo grow up

[moxy89]

got a VXR burg, saxo was scrapped, why say stuff like that!! Its his pride and joy and you try and knock him. TWAT

[kane_15023]

Being honest don't get you anywhere then as they say

[harry289]

I'm a fully qualified mechanic. Yes on test drive there was knocking from the front, and yes I knew what the knocking was. After torquing up the steering rack bolts hey presto, no knocking and a solid front end! :)

Springs were mounted wrong way round on one side which I told Jamie about, again problem solved.

ABS works fine! Agian that was tested on test drive and was tested the other day! But that's going to be removed in the near future anyway as it's better without for track use.

And there's no lights illuminated?

----------------------------------------------------------------------------------

If it had been hit then you cannot tell. Must've been about 1mph....car is in my ownership and things have been removed, cleaned and lubricated :) its all sweet, running sweet, looks sweet, sounds sweet and goes like stink! I'm a happy chappy :)

[kane_15023]

Vxr and it's only 126.6bhp lol ok nice pic looks like a Saxo to me

[Prickle]

Old owners being abit bitter tbh.

It looks really clean harry as you obv know so id just blank him.. and carry on.

[harry289]

There's nothing much else to say, he doesn't know the condition it's in now :) with a little know how things can be fixed and made better!

--------------------------------------------------------------------------------------

On another note I have some stainless steel fixings for a few pieces, 266mm brake set up which has gone on today with braided lines, snow foam lance for my new Nilfisk pressure washer and some more updates to come! :)

[kane_15023]

Take the clocks out when u get 5 take all the tape of the lights Eng management abs n airbag light

[harry289]

Engine management will be for the decat
Airbag is from the seats I use
ABS will just be a sensor but like said, doesn't matter due to it being removed in the next 2 weeks :)

[m11ler]

Who is this kane kid and why is he so persistant to try and fuck you over lol. Reported.

[Jamie]

Being honest don't get you anywhere then as they say

Why are you a cunt and why did you attempt to ruin the car..,

I'm guessing the guy I sold it to, sold it to you, he didn't have it long enough to have all these issues.

I call bullshit too. Your just bitter and weird.

[Boucler]

Your car looks great harry! Nice to see some sweet detailing! My arches get filthy too sometimes, always looks better after a clean though. :)

[harry289]

Thanks guys. Yeah going to have a big detailing session soon. I always love a spanking clean chassis. Makes the car feel fresh!

Updates coming in next couple of days

[ChAdS]

Take the clocks out when u get 5 take all the tape of the lights Eng management abs n airbag light

Harry is not a idiot he knows what he is buying he would not of bought the car if they was anything seriously wrong.

Keep your mouth shut nobber.



Looking forward to seeing pics Harry.


Sent from my iPhone using Tapatalk

[harry289]

I'm really happy with the car. Its a fast road/track car to me and its perfectly fine for my needs :) Hi Chads, not spoken in a while!

-------------------------------------------------------------------------------------

Whats going on here?

http://i1046.photobucket.com/albums/b462/harry28991/P1010099.jpg

266mm set up currently going on with braided lines. Oh and Brembo discs and pads for the rear. I did order mintex pads for the rear but KamRacing didn't have them in stock so they sent the more expensive Brembo pads for no extra charge.

http://i1046.photobucket.com/albums/b462/harry28991/P1010095.jpg

http://i1046.photobucket.com/albums/b462/harry28991/P1010098.jpg

[jimbo06]

I followed this car when jamie built her up, shes a lovely motor and im sure you will keep it that way dude.

What happened to the brembo's?

[ryan_g86]

Car looks fantastic mate. My exhaust mounts come today all nice and secure, Thanks again mate.

[harry289]

Brembo's are sold pending payment :) yeah its a really nice Saxo! I'm a happy owner!

Nice one mate glad you got them okay! Thanks for your comment :)

[Prickle]

http://i1046.photobucket.com/albums/b462/harry28991/P1010095.jpg

I have that line on my inner plastic arch too! >far right. at first i thought something collapsed causing the wheel to scrub on the arch lol. Must be normal.

Btw those braided lines - are they the same as the normal saxo braided lines to oe calipers (if you get me).

[harry289]

Yeah its just the 15 inch 50 profile tyres lowered 40mm on full lock. They haven't scrubbed with my driving the car though :)

And no you need to get some braided lines off swampy on here made :)

[Prickle]

Yeah its just the 15 inch 50 profile tyres lowered 40mm on full lock. They haven't scrubbed with my driving the car though :)

And no you need to get some braided lines off swampy on here made :)

Prev owner must of ran 50s at somepoint then before he put the 45s on it. Douche! (on about mine btw lol).

Ah swampy! bit risky after reading his thread! :panic: they do look good though. Any other pics?

[harry289]

Why is it risky? They took over a week to get to me but they're on now!

[Prickle]

Why is it risky? They took over a week to get to me but they're on now!

After reading peoples issues they've had with him in it. Must be a hit and miss thing i suppose.

Whats the exact size so i can note it for future ref?

Cheers. :hug: :A:

[harry289]

I'm unsure the exact size. Might be best to PM Swampy about them. I think he gets them made by exact and then send to him then posted to whoever.

Wish I could be more of help

[harry289]

Wooo! All on and working. Need bedding in but feel good! :) feel good under the pedal :P

[ChAdS]

[QUOTE=harry289;6064186]Hi Chads, not spoken in a while![\QUOTE]

Alright mate no lol been busy.

Car is looking well :) I am looking to get a car in the next few weeks can't do without one! I have tried for about 2-3 months so gave it a good go! we have a mortgage on paper but can't find a fecking house so car time :)




Sent from my iPhone using Tapatalk