turbo techincs 5th injector help...

[bunty99]

hi i just bought a 5th injector controller and its a turbo technics one.. know the problem im having is finding any specs or diagrams for wiring or just any actually information on how this perticular controller works.. and how i go about wiring it in.. i have everything i need basically, i just want to know what im doing before i go ahead then get stuck and cant use the car....

so im after any information that can help me please..

[sam_16v]

http://lmgtfy.com/?q=turbo+technics+5th+injector+controller

[bunty99]

http://lmgtfy.com/?q=turbo+technics+5th+injector+controller

i already tried that, im not an idea.. but theres not specific spefications about it... and im not signing up for 4 or 5 different fourms to read through things that more than likely wont tell me what i need to know..

i posted up on here as i know theres quite a few people who have turbod their saxos and i was hoping some of them have gone down the 5th injector route.. or maybe anyone who has had dealings with this type of controller before..

[sam_16v]

a pug 205 gti forum will be best as there are loads of turbo 205's that run this :y:

and imo a 5th injector is a waste have the correct injectors on the rail plus a good map and you wont need the 5th injector

[bunty99]

a pug 205 gti forum will be best as there are loads of turbo 205's that run this :y:

and imo a 5th injector is a waste have the correct injectors on the rail plus a good map and you wont need the 5th injector

Im using 5th injector as im not planning one gettin car remapped... I have bought and sourced everything my self and so far i have everything i need and i have only spent £130.... :D
so when im done i will have a turbo kit for less than 150... Im not goin after massive gains or anything like that.. Om basically doing it tp prove a point to some my mates that it can be done VERY cheapily and realiable of done correctly .. Just have to take ur time....

[sam_16v]

in which case i would buy a wideband lambda sensor with afr gauge so you know what's going on and try and prevent detonation

[bunty99]

afr gauge is the only thing i havnt got yet.. that is literaly the last thing on my list...

im just waiting on a cheap one that i like and ino is good.. every know and again there are idiots who sell really good branded stuff dirt cheap on ebay and piston heads ect.. so i just keep checking them all the time..

[sam_16v]

Yep just a case of waiting there's a cheap turbo downpipe on there at the mo

[bunty99]

Yep just a case of waiting there's a cheap turbo downpipe on there at the mo

on ebay or piston heads? i hadnt noticed that lol

[bunty99]

just found it on ebay.. im guna watch that its in better condition than the one i got lol

[sam_16v]

Yeah mate ebay its custom made

[bunty99]

Ino its only been a day but bump lol..