Wiring Front Door Speakers

[TU-Tuning]

I've used the search but i cant find anything. I have some 12 guage speaker cable I bought to wire the front soor speakers, as I'm going to get some S50's soon and the standard cables are obviously crap. But how the hell do you get the wires through the grommet in the doors etc? Has anyone got any advice please :fcuk:

[DaveWard]

Its a proper ball ache of a job with the plastic plugs easiest way is just drill a hole next to the door side of the plastic plug and then use the existing hole/gromit in the door pillor.

[TU-Tuning]

So make hole in the plug, stick a coat hhanger through and pul the cable through yes?

[DarylVTR]

i just fed the wires in the door sills to be honest, you dont look in your door openings, much easier to just feed to under the door seal and in the door card and wrapp the wires in black insulation tape if you want to discise it more. Thats what i have done..

[DaveWard]

Thats a bad way to do it for 10 minutes extra work you could have done it the safer correct way.

On base model saxos its as simple as threading a wire through the rubber door gromit. On Saxos with electric windows that have a plastic plug you have to take the plug off mess around drilling it and adding conections and wires to it. Thats why its loads easier to drill a new small single hole next to the plug and use that.