View Full Version : fault code p0420
huricane
18th August 2012, 22:15
does any one know what it means when i looked it up it came back with catalyst efficiency threshold (bank1) i also looked deeper and it could be temp sensor..cat..o2 sensor
Aaron
18th August 2012, 22:24
Car year? what is it? and single plug or 3 plug ecu? ( can help diagnose what it is more)
code P0420 may mean that one or more of the following has happened:
* Leaded fuel was used where unleaded was called for
* An oxygen sensor is not reading (functioning) properly
* The engine coolant
temperature sensor is not working properly
* Damaged or leaking exhaust manifold / catalytic converter / exhaust pipe
* Retarded spark timing
* The oxygen sensors in front and behind the converter are reporting too similar of readings
huricane
18th August 2012, 22:29
yes i know so it could be many problems but i dont what to go buying all sorts to fix 1 problem
vtr 2002 3 plug
Aaron
18th August 2012, 22:36
Get underneath, move the cat side to side? does it rattle?
check for exhaust leaks.
The sensor after the cat could be faulty or the cat faulty which makes the lambda sensor after the cat read wrong.
Try a second hand lambda(after cat) around tenner..
if not, then new cat. Second hand they aint that dear - 30? i remember seeing one brand new for 50- not sure on its quality mind
huricane
18th August 2012, 22:40
cat dont move ..no leaks.. i see if i can get another sensor but it the 1 after the cat ??
thanks for your info
forbessid
25th August 2012, 05:49
If you have got a decat on mate this code will come on mine does it all the time
daveymac
25th August 2012, 07:28
I get this code on mine also. Got 2 New sensors in an 1 year old cat. Came up after I got rid of the de cat pipe. Puzzles me also.
Sent from my HTC Desire S using Tapatalk
stevo67
25th August 2012, 09:18
cat dont move ..no leaks.. i see if i can get another sensor but it the 1 after the cat ??
thanks for your info
The 2nd lambda sensor doesn`t really do a lot,most probs seem to be from the 1st one.:y:
Edit: just looked in my haynes fault code manual & po420 is listed as catalytic convertor below threshold effeciency.
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.