Baz's Fiesta ST - Update 24/06/14 Superleggera's Fitted Update Opions on Stickers Pg8

[Baz]

Picking up a new car on Saturday :y: probs not to everyones taste but with doing a fair few miles a day for the new job I wanted something new with abit of poke but fairly economical without it being a tractor. So here it is :)
Pics are from the advert.

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/Fiesta1.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/Fiesta.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/Fiesta2.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/Fiesta5.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/Fiesta3.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/Fiesta4.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/Fiesta6.jpg

Comments and abuse welcome lol

[blackie_2k5]

its RED!

i quite like the look of these tbh..should get some cams fitted :y: they help out alot

but should be alot quicker then the furio as is..so no need to rush into stuff like that :)

[Prickle]

Clean! like i said though try and prevent it from fading!

[Dano]

Got a real soft spot for these shape fiestas, even if no one seems to like em, I do!!

Wouldnt mind one, one day ;)

[jayline]

loves cars these, and with the right exhaust they do sound very nice with the occasional pop and bang but i seem to be put off by these as the local TW*Ts in my area have these and think they are race cars on a circuit when they are in a housing estate!!!

cant wait to see what the plans are and the outcome as the furio was a lovely looking car :y:

p.s looks very clean mate :y:

[Viper]

Never been a fan of these.

Hope you enjoy it though :y:

[Gandi699]

MR200 kit? ;)
I think they are a tidy looking little car any mods planned? I assume a little ride height drop perhaps

[Baz]

No plans as of yet, except find out what exhaust is on it. Will probs get dropped in the future though!!

[LSOfreak]

good choice
not a car to show off how fast it is, but for the looks of it, i think they look great.

my mate had an exhaust like that. was a powerflow and was ridiculously loud lol i loved the sound of it tbh

[GolfJay]

Baz Baz Baz... what have you done?! :p

[Gandi699]

good choice
not a car to show off how fast it is, but for the looks of it, i think they look great.

my mate had an exhaust like that. was a powerflow and was ridiculously loud lol i loved the sound of it tbh

They aren't THAT slow as standard though

[MickyWelsh172]

Love it mate.

[Baz]

good choice
not a car to show off how fast it is, but for the looks of it, i think they look great.

my mate had an exhaust like that. was a powerflow and was ridiculously loud lol i loved the sound of it tbh

didn't seem very loud this one, well compared to a decatted piper anything is quiet lol

Baz Baz Baz... what have you done?! :p

erm I've bought a car thats comfortable and has decent mpg for my many motorway miles! Aslong as its good to drive and quicker than the paxo i'm happy :)

[smiith]

Looks good, not a big fan of the Fiesta, but looks a decent car. Red is a really nice colour when kept clean!

[craig180]

Have you banged your head?

[DUFC]

Love it

[m11ler]

Quite like these! Nice chice mate :)

I'll be going sensible soon also, due to the new job i'm doing like 450 miles a week.

[tichy]

I Realy like theese, not the quickest car but they do look good. Get rid of those tinted windows though it'll look cleaner.

[Baz]

Knew it would get a nice mixed reaction! I do love these in red, look awesome, just need to keep it protected!
Same as me Miller, nearly, gonna share the miles with the missus Mini.

I actually like the tints on it for some reason, look better in the flesh than the pics.

[LSOfreak]

They aren't THAT slow as standard though

they arent by any means slow. i think its just for what they are, quite slow. A 2litre 16v which is slower than a 1.6 16v saxo/gti :S

[Baz]

they arent by any means slow. i think its just for what they are, quite slow. A 2litre 16v which is slower than a 1.6 16v saxo/gti :S

Yup, not really much power from a 2 litre engine really but better than what I had, breathing mods should free it up nicely :)

[Gandi699]

They couldnt have made it too close to the ST focus though. Besides the duratec has a lot of tuning potential

[DAMSK11]

I'm thinking about getting this shape fiesta for my next car. Probs end up doing the same as this one and kitting it to make it look like an st :homme:

Looks tidy though mate, nice buy.

[tichy]

Have you had this yet mate, looking for some advise/insight what they like to live with, boot space, comfy, quickish ? Just stuff like that. My mates got one at work but if you listen to him evary car he's had is the best car in the world lol. I'm torn between one of these or a 106 gti. What do you think of it compared to your sax ?

Thanks.

[gzrvts]

150bhp ripe for a decat and a remap and bang rapidoo!

Good mpg standard to bud nb choice.:clapping:

Slam it on its ass bro.:wacko:

[Jamie]

Nice very nice Baz,

They won't set the world on fire stock but a few choice mods and they go well major upgrade over a Saxo :).

As for paint fading because it's red, as long as it's washed and polished fairly regularly it will be fine. Usually red fades when it's been neglected.

[Baz]

Have you had this yet mate, looking for some advise/insight what they like to live with, boot space, comfy, quickish ? Just stuff like that. My mates got one at work but if you listen to him evary car he's had is the best car in the world lol. I'm torn between one of these or a 106 gti. What do you think of it compared to your sax ?

Thanks.

Personally its miles better than the Furio, just much better made, so i'd rather have the ST over a GTi. Probs get better MPG with the GTi though lol.

Loads of boot space too, more than the Saxo, hell of alot comfier.



Anyways, onto the updates :)

Done a few minor things over the last 2 weeks. Will let the pics do the talking.


First job was to get rid of the rear wiper (standard):
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0565.jpg

Then fitted a boot lock cover:
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0569.jpg

Then I swapped my grey plastic bits for black ones and a rear diffuser (no pics yet) along with smoked side repeaters.
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0576.jpg


That is all for now, quick vid of the exhaust whatever it is, not too loud, 20db quieter from the inside than the Saxo lol
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/th_VIDEO0015.jpg (http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/VIDEO0015.mp4)

Comments etc welcome :)

[Prickle]

Cameras too close to the zoorst :/

[Baz]

Cameras too close to the zoorst :/

I know :( might get another one tomorrow with some new piccies

[Baz]

Thought i'd give the car a polish etc today, started raining just as I was buffing off the gloss protection....typical!

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0581.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0580.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0583.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0579.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0582.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0585.jpg

And after a trip to the bank, beading!
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0584.jpg

Comments and criticism welcome :)

[CrouchyM]

Please get this exhaust: "stock manifold, Mongoose flexi pipe, piper de-cat pipe and piper non resonated cat back"

http://www.youtube.com/watch?v=t6FWiR7eG7k&feature=channel&list=UL

[Baz]

Please get this exhaust: "stock manifold, Mongoose flexi pipe, piper de-cat pipe and piper non resonated cat back"

I quite fancy this one lol, up for sale atm the whole lot for £600

https://www.youtube.com/watch?v=Me0Nvbm_jeg

[Prickle]

Looks good Bazzle. :D

[Brettles1986]

[Insert standard "needs lowering" comment here]

Looks nice though, I am a fan of these.

[CrouchyM]

I quite fancy this one lol, up for sale atm the whole lot for £600

https://www.youtube.com/watch?v=Me0Nvbm_jeg

Do it, sounds nice!

[leeroybrown]

Those red fog lights have got to go pal :-(

[Baz]

Those red fog lights have got to go pal :-(

In time, wanted to keep the standard silver ones on but the red ones came in the deal of the swap lol so for now...they will do lol, are we still waiting for your exhaust video?

[Karlb1]

Not too bad, not a massive fan but looks like a good base for small mods.

My mate at work has a red Zetec S but with the rear bumper from an ST. He has the standard wheels in black with the red badges, lowered a tiny bit, not too sure how much, mmaybe 30mm.

I think he has a manifold that he ordered by mistake, he was told the ZS would be the same fitment as the ST but it's completely different, think the name Mountune rings a bell but i could be wrong.

[Baz]

Cheers mate, looking at getting some eibach extra lows which lower the ST 35mm, 50mm from standard fiesta. Not really anything I want to do on the outside now. Not that I know of anyway

[e8_pqck]

smoked side repeaters look a bit wank
not sure why you have dewipered the boot? Are you stripping it out? i thought you bought it for comfort items? strange.

Like most, not a fan, a thoroughbred birds car, what a bloke would buy his missis after buying a focus.

[Baz]

smoked side repeaters look a bit wank
not sure why you have dewipered the boot? Are you stripping it out? i thought you bought it for comfort items? strange.

Like most, not a fan, a thoroughbred birds car, what a bloke would buy his missis after buying a focus.

Still little undecided on the repeaters, there abit too dark. I dewipered the rear as there is no need for it, water runs straight off the glass, rear demister gets rid of mist and when on the M'way the spray don't stick to the rear as it does on the Saxo.

Not really sure how its a birds car but if thats what you think lol

[Gumbo]

lovely cars these just watch out for the problems with the clutch pedal there is a plastic clip which connects the pedal to the rod which actuates the hydraulics. The clips are prone to breaking, Had this problem with a mates st.

[Baz]

New plates to get rid of the old metal ones, finally got rid of them!

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0587.jpg

[mrorange2]

Very nice car, I have a very simliar Facelift red ST if you havent already get a K&N 57i kit put on it make it such big difference.

[leeroybrown]

Beat me to the videos :-(

[Baz]

Very nice car, I have a very simliar Facelift red ST if you havent already get a K&N 57i kit put on it make it such big difference.

Not done anything engine wise myself, want a mountune cais tbh but can't justify £200....but like how it still look OE with it fitted

Beat me to the videos :-(

sorry Sir, now get on it! Hope your battery doesn't die before you start it up ;)

[mrorange2]

Not done anything engine wise myself, want a mountune cais tbh but can't justify £200....but like how it still look OE with it fitted



sorry Sir, now get on it! Hope your battery doesn't die before you start it up ;)


I wanted the Mountune Cais as well but they still use a 57i filter in a mountune airbox. For the cost of a K&N kit new or even second hand its well worth it the standard intake system is terrible.

[Baz]

I wanted the Mountune Cais as well but they still use a 57i filter in a mountune airbox. For the cost of a K&N kit new or even second hand its well worth it the standard intake system is terrible.

Yeah, just PM'd a few people selling one second hand, should pick one up for £40-£50 delivered. Next purchase will be some eibach extra lows then hopefully full janspeed system

[tichy]

Are those 3d number plates mate like with the letters raised, if so where did you get them from?

[Baz]

Are those 3d number plates mate like with the letters raised, if so where did you get them from?

yup, looked at a fair few places and cheapest was this guy on eBay, most places wanted £45....
http://www.ebay.co.uk/itm/330510945750?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

[leeroybrown]

Not done anything engine wise myself, want a mountune cais tbh but can't justify £200....but like how it still look OE with it fitted



sorry Sir, now get on it! Hope your battery doesn't die before you start it up ;)

Shat up lol

Wait till you see my updates on Saturday

[Baz]

Shat up lol

Wait till you see my updates on Saturday

meh its only gonna be refurbed wheels, yawn :p

[leeroybrown]

meh its only gonna be refurbed wheels, yawn :p

Oh really.....:homme:

[Baz]

Small update for this morning, got these :)

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0590.jpg

12.5mm spacers for the rear wheels.

[Brettles1986]

Small update for this morning, got these :)

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0590.jpg

12.5mm spacers for the rear wheels.

Weird shaped spacers them

[josh11490]

Think on the fiesta's they go on the axle? Might be completely wrong though haha

[Gandi699]

A genuine ford part? What were these produced for?

[Paul_JC]

They go between the hub and beam, how much were they baz? looking for some for my mk5

[Baz]

They go between the hub and beam, how much were they baz? looking for some for my mk5

Got them on a group buy on the fezza forum, £25 next day delivery from partbox. (last day today)

As said they go between the hub and beam, hence the funny shape.

They are originally for the Puma.

Need some help on what to do, still unsure on the red fog rings so wrapped one in some carbon I had left over.

Opinions?

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0597.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0598.jpg

Also a few other pics for good measure lol

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0595.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0592.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0593.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0596.jpg

[Jay_]

Still baffled at the shape of those spacers! Get loads of pics when fitting them! :y:

I would say carbon wrapped fog rings tbh.

[Brettles1986]

Sold the saxo now?

[Baz]

Sold the saxo now?

Yeah took the deposit after about a week of it being for sale. Sad to see it go but the ST took my mind off it lol

[Whirly]

id carbon the fog light surrounds mate

[Piggie]

Carbon fog lights. Or just black....

Anyway lovely car. Like the red alot even though im not usually into them.

I nearly bought one of these. If they were just abit pokier id have had one!

[Baz]

Fog lights are now carbon wrapped, only a quick job, pretty poor but they are better than they where from a distance lol.

I do have something on my way to me today, however I'm not going to be here when it arrives :(

[Baz]

Had a box arrive this afternoon.....whats in the box?!

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0611.jpg

[AlexB]

springs?

[Baz]

Alex.....you know whats in the box haha, unfair advantage!


http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0612.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0613.jpg

Lowering at front: 35mm
Lowering at rear: 35mm
Made by Eibach exclusively for Rude Racing
Designed to work with standard shock absorbers
Progressive rate sports spring
No loss in ride quality

A true 35mm drop
Most spring manufacturers quote exaggerated lowering amounts for the ST150. They do not take into account the ST150 is already 15mm lower than standard models from the factory. These springs however will lower the ST150 by a genuine 35mm (front and rear). Until now, the only way to lower an ST150 by this amount was with a coilover kit!

Should look something like this:
http://www.ruderacing.co.uk/images/pic_750/eib-rr-XL_a.jpg

[leeroybrown]

I like alot, will it not rattle out your teeth though??

[Gandi699]

so those springs are basically sportlines but Rude racing have exclusivity?

[Baz]

I like alot, will it not rattle out your teeth though??

I hope not lol, you should buy the supercharged one in white that's for sale at 5k.

so those springs are basically sportlines but Rude racing have exclusivity?

Nah they sit a little lower than the sportline springs. Not much less, plus they are cheaper at £140

[leeroybrown]

I hope not lol, you should buy the supercharged one in white that's for sale at 5k.



Nah they sit a little lower than the sportline springs. Not much less, plus they are cheaper at £140

Been looking at it along with a MR200, not sure I want to downgrade :homme:

[LSOfreak]

my mate had some 35mm eibach springs on his mk6 zetec s. Ride comfort felt like standard, was a good subtle drop tbh

[Gandi699]

Eibach make very good springs indeed, I've fitted some to mine.

[Gandi699]

Been looking at it along with a MR200, not sure I want to downgrade :homme:

How much power does the supercharged one make? I still need to get some videos of my mates mr200

[Baz]

Quick copy and paste of the advert for the charged ST:

Ok so its time i sold my beloved Supercharged ST,
Its a genuine sale as i am going to University and we all know the Pains of Uni budgeting.

The amount of work and love gone into this Car is unreal and i will miss it tremendous amounts, the whiney aeroplane never fails to put a smile on my face any day of the week!
Car has been well looked after, Regularly washed, waxed and treated for protection.


Down to the Details.

NOTE: I WILL SELL FOR 4500 MINUS THE HEAD UNIT

2005 2ltr Supercharged Fiesta St
44,000 Miles
Running 260bhp
Diamond White
Central Locking Fob
Electric Windows
ABS
Fogs

It has been upgraded with a Stage 2 Supercharger Pulley Kit which was provided and fitted by Professionals at Jamsport.
This kit alone is in the Region of £4,000.

Along with the Supercharger kit it has:

Cosworth Inlet Manifold (£800)
Full Milltek Sport cat-back system, 4-2-1 Manifold.
Front PumaBuild 325mm Brake Setup with Red Calipers (£1,000+)
Rear Calipers Painted Red
Front Strut Brace
Genuine Climair Wind Deflectors
Lowered on Eibachs

Legal Front and Rear Pressed Plates
Debadged Fiesta Logo.
Double Pillar Gauge for Oil Temp and Boost. (Are electrically wired up and fitted just need the Boost pipe and Sensor through to the Engine bay)

Front, Rear and Steering Wheel Supercharger Badges
Side SC260 Edition Decals
Front Plastics in Carbon Fibre
Rear Splitter in Carbon Fibre
Front Fog covers in Matt Black with Diamond White Rings.
Rear Reflectors in Matt Black
All ST badges have Purple Inlays on them, Including Door Sills.
Window Tints - Limo Rear, Sunstrip, Smoked back and light fronts. (These can be easily Removed)

Headunit. (Will be sold with car for the Right price or Removed if not)

It has a Pinoneer Avic F930bt Double Din headunit fitted which was £1000 brand new.
Sat Nav, Ipod Link with Cable through to glove Box, Bluetooth Link, DVD, Reverse Camera Link up, Safety Lock Piece
And has the Genuine Surround.
http://www.carradios...30bt-3188-p.asp
(Full details here)

Alloys - 17" Lightweight Oz Superturismo Powdercoated in Two tone Candy Purple
Slight kerbing to Drivers Side but nothing Major.
Running Spacers


Extras (Not Fitted to car)

Original Full Front Brake Setup
Engine Tuner and Diagnostic Reports
HID Kit

Bad Points

Only real thing there's a slight tear in the Drivers side front tyre which may be advised on next MOT. (But thats another 9 months away!)

I'm sure there's loads more i have forgot, for such a brilliant car!
Take a look below. (Will get more updated Pictures)

[leeroybrown]

We have both a black supercharged one and Red turbo near to where I live Baz.

Charged one sounds good, but looks slow and same goes for the turbo buddy.

I do have little soft spot for a littlre ST or a Swift sport.

[Baz]

Fair enough, there is one at 375bhp on FiestaSToc that sounds pretty quick out the blocks, though I aint actually seen it in any videos. MR200 is very tempting though, only problem is the price and the fact I don't want a Miltek/Mountune exhaust system lol.

http://www.fiestastoc.com/forums/topic/20983-st-mikes-384bhp-jamsport-supercharged-fiesta-project/

Not sure if you'll be able to read it or not...

[Thou]

Lovely car Baz. Is the advert for the supercharged one on stoc? Or somewhere else I can read it?

[Baz]

Lovely car Baz. Is the advert for the supercharged one on stoc? Or somewhere else I can read it?

The advert for the one for sale is on STOC

[Baz]

Update


Got this today....

http://i.ebayimg.com/t/FORD-W1-CARBON-ID4D-63-TRANSPONDER-CHIP-/00/s/MzY0WDQwMA==/$(KGrHqFHJEYE-kdYZYRWBPyIi-gG7Q~~60_12.JPG

Any thoughts? lol

Also looking at either of these if both still for sale come payday! Which do we think sounds best?

Janspeed
https://www.youtube.com/watch?v=Me0Nvbm_jeg

Simpson
https://www.youtube.com/watch?v=zxa14DtmCHw

Pt 2 hopefully tomorrow followed by another update on Saturday!!

[Bedford126]

Update


Got this today....

http://i.ebayimg.com/t/FORD-W1-CARBON-ID4D-63-TRANSPONDER-CHIP-/00/s/MzY0WDQwMA==/$(KGrHqFHJEYE-kdYZYRWBPyIi-gG7Q~~60_12.JPG

Any thoughts? lol



That's a transponder chip that mate.

Have you had a look at the milltek systems they have a really nice full sound to them.

[Old_School_Saxo]

A genuine ford part? What were these produced for?

Ford Puma Come in a 10mm 12.5mm and 20.5mm

[Old_School_Saxo]

Weird shaped spacers them

There alxe spacers and thay fit inbetween the drum/hub and the alxe and the reasson for the shape is that thay was made to be fitted on the disc setup and the back of the hub is that shape.

[Old_School_Saxo]

Think on the fiesta's they go on the axle? Might be completely wrong though haha

on most fords mk6 fiesta is the last mind and yes thay fit inbetween the axle and drum/hub.

[Old_School_Saxo]

Update


Got this today....

http://i.ebayimg.com/t/FORD-W1-CARBON-ID4D-63-TRANSPONDER-CHIP-/00/s/MzY0WDQwMA==/$(KGrHqFHJEYE-kdYZYRWBPyIi-gG7Q~~60_12.JPG

Any thoughts? lol

Also looking at either of these if both still for sale come payday! Which do we think sounds best?

Janspeed
https://www.youtube.com/watch?v=Me0Nvbm_jeg

Simpson
https://www.youtube.com/watch?v=zxa14DtmCHw

Pt 2 hopefully tomorrow followed by another update on Saturday!!

She wont sound like that unless you get the whole system mind.

[Baz]

She wont sound like that unless you get the whole system mind.

Both only come in full system terms, Simpson is a one off that was made for someone, the Janspeed will only fit if you buy the full system and manifold as shown in the video.


Bedford - I thought about the Miltek....only problem is that everyone has one because they still fit with the standard system. Obv means you can buy it in bits to save the hit on cost but I fancy something a little different.

and yes its a transponder for my new key that should be here today. Gonna get rid of the shit key for the flip key :)

Miltek Full system
https://www.youtube.com/watch?v=Z7aXwbmMcoA&feature=related

[leeroybrown]

Miltek! Who cares if everyone has one, they look and sound good.

[Baz]

Miltek! Who cares if everyone has one, they look and sound good.

Just what I expected from you lmao, I want something different from the norm...

[Gandi699]

Mates got a milltek on his MR200, sounds nice

[leeroybrown]

Just what I expected from you lmao, I want something different from the norm...

HAHAHAHAH shut up ya gooooon, dont BTB make them for the fiesta?

[Baz]

Only 1 video of one on Youtube so I guess it'll be custom made by them. Shall email and find out!

[leeroybrown]

Only 1 video of one on Youtube so I guess it'll be custom made by them. Shall email and find out!

Expect to pay a total fortune

[Baz]

Expect to pay a total fortune

More than likely...no reply as of yet.

Got my flip key today :) well, attempted delivery anyway as it needed signing for, so gots to pick it up tomorrow, get it cut and then start swapping bits over and programme it :D

[Baz]

Proper shit pics but nvm...

Got my new key today to get rid of the crap Tibbe key :D

Went to get it cut before but he needs a new blade so gotta wait till Monday....

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0625.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0624.jpg

Obv needs clipping together but need to put the transponder in yet.

[Whiskerzz]

Miltek FTW! Sound awesome, look awesome, therefore get one and BE awesome :P

[Baz]

Would want to decat though and I think it sounds too raspy for me, don't you think?

https://www.youtube.com/watch?v=-HP71foKZsA

[Yates]

bring back the green saxo

[Baz]

bring back the green saxo

I'd love to Matt, loved the 1.0 green machine :homme:

[Ben_SaxoForte]

Very nice, thinking about one of these after the saxo too :y:

[simmo]

Baz who is in your avatar?

[Baz]

Baz who is in your avatar?

Raven Riley IIRC

[blackie_2k5]

custom sytem will probs be cheaper then an off the shelf..depending on where you go of course

[Baz]

Had a chap come round last night and while it was raining it got lowered lol


Pic of the rear with the back end facing down the drive, should sit a little lower once i've been out in it.

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0632.jpg

[Baz]

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0634.jpg

[Tom5190]

looks good matey, i thought you were a tech though?

[AlexB]

glad it got sorted man

[Baz]

looks good matey, i thought you were a tech though?

Qualified yeah but no tools etc to do it so that's why I didn't do it.

glad it got sorted man

Indeed :-) drivers side wasn't too bad tbf, took a little work

[leeroybrown]

Looks nice Baz son

Stripes need to go the distance like, go for the fresh look.

[Baz]

Looks nice Baz son

Stripes need to go the distance like, go for the fresh look.

I know what you mean, been tempted over the last few weeks to remove them but not 100% sure yet, maybe take the plunge next time I clean it, some of the edges are coming away, maybe if they come off a little more i'll just wip em off lol

maybe look something like this with diff wheels

http://i40.photobucket.com/albums/e242/baznett/DSC_0019_zpsd4f3204b.jpg

[Whiskerzz]

keep the strips and get some white pro race 1.2s ;)

[Jay_]

Looks good with a bit of low!

I'm a massive fan of the no stripes, 1.2s and mud flaps in the above photo! :y:

[Rob-6]

Looks good I would go with no stripes and black pro race 3s

[Baz]

Got some coloured coded jet washers today, wanted to get the mist type washer so got some that had been painted, also took some pics for the dirty photo comp on SToc.

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0645.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0647.jpg

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0640.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0641.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0642.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0643.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0644.jpg


Not sure if its dropped at all since the springs were fitted, anyone think it has?

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0643.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0634.jpg

[JoshFurioBrookes]

I think its dropped a bit, sits well!

[Jay_]

Nope, from the pics you just posted I don't think it has :geek:

[Mezza]

looks nice!
Shame they come out the factory so restricted can get some decent power out of them if you push them :)
the other girl is kate from kates playground haha

[Tom5190]

Qualified yeah but no tools etc to do it so that's why I didn't do it.


Ah ok matey, looks god anyways i agree about the stickers too!

[Baz]

Well my package finally arrived from Yodel today! Should have been here on friday but turned up today at 8:42pm....jokes man!!

Here it is!


http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0651-1.jpg

[GolfJay]

I'm sure a box on the rear seat will be a popular modification next show season... lol

[Baz]

lmao definatly Jay!

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0653.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0652.jpg

Hows this?

[Prickle]

About time Rob, lad! like ive said to you all day, Yodel are a joke no question..

Stuff sleep get out with a torch and fit it :cool:

[Aly]

I really rate the Mountane stuff You gonna take it to Pumaspeed for mapping?

[Baz]

Not gonna bother with a remap for just an induction kit and backbox. Depending on what route I take someone offers half price map if you buy Miltek from them.

Either way it'll probs end up at AMD in Northampton for a remap

[Baz]

Mountune is fitted :) Just need to attach the cold air feed somewhere but my hands were too cold lol

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0655.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0656.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0657.jpg

[luthor1]

Apparently these Duratec engines in the Fiesta have a massive restriction on the intake and in the exhaust pipe by removing these you go straight from 150bhp to nearer 170bhp, did you identify these or is it an old wives tale??

Does it go much faster now? I had one of these a few years ago, I loved it to bits but always wanted more power and didn't want to invest that much money on an 'experiment'

[Gandi699]

Thats the kit my mate uses on his MR200 so obviously flows well enough.

To the guy above, I reckon with this engine its the mild cams and the restrictive inlet manifold I believe that holds them back.
OP are you thinking about relocating the pas tank? Have heard these can boil the fluid pretty easily due to location over the exhaust.

[leeroybrown]

Does this mean you now have the MR165 kit?

[Simon0014]

My friend used to have one and full system induction etc and a remap but was limited to 165bhp unless you uprate the cams (what the mapping place told him.

Really like these, making good progress mate!

[Baz]

Apparently these Duratec engines in the Fiesta have a massive restriction on the intake and in the exhaust pipe by removing these you go straight from 150bhp to nearer 170bhp, did you identify these or is it an old wives tale??

Does it go much faster now? I had one of these a few years ago, I loved it to bits but always wanted more power and didn't want to invest that much money on an 'experiment'

Definatly has the feel of abit more grunt! Wasnt thinking i'd get much like on the Saxo but defo has something there!

Thats the kit my mate uses on his MR200 so obviously flows well enough.

To the guy above, I reckon with this engine its the mild cams and the restrictive inlet manifold I believe that holds them back.
OP are you thinking about relocating the pas tank? Have heard these can boil the fluid pretty easily due to location over the exhaust.

No intention at the min to move the PAS as it doesn't get driven to hard at the minute.

Most restrictive parts is the air filter, flexi pipe and the smaller TB which can be upgraded to 60mm

Does this mean you now have the MR165 kit?

Not quite, would need Manifold, sports CAT and generic mountune remap for that

My friend used to have one and full system induction etc and a remap but was limited to 165bhp unless you uprate the cams (what the mapping place told him.

Really like these, making good progress mate!

Yeah ideally you need to get cams to get past 165 but its possible without!

Thanks for comments guys, will try get some better pics of the whole bay later this week :y:

[GolfJay]

Yeah ideally you need to get cams to get past 165 but its possible without!

Thanks for comments guys, will try get some better pics of the whole bay later this week :y:

Surely the brown box on the back seat add 30 horsepowrz bruv!!

[Gandi699]

Is a 4-2-1 tubular manifold standard on these?
The throttle body on the MR 200 looks huge when I last had a gander at it

[Prickle]

Looks good Rob

[Baz]

Is a 4-2-1 tubular manifold standard on these?
The throttle body on the MR 200 looks huge when I last had a gander at it

Pretty sure they fit the 60mm TB on the MR200 from the 48mm IIRC, so a fair stepup!

[Baz]

Surely the brown box on the back seat add 30 horsepowrz bruv!!

There's nothin on any of my seats nvm a brown box..

[The_Notorious_C_A_T]

I quite liked my st, until it fell apart lol.

If you do end up fitting a new manifold removing the scuttle makes it a lot easier. If you are on one of the fiesta sites I also did a guide for the inlet removal if you ever do go that way as well.

[dan-sport]

Passed you on the m54 earlier, car looks decent an im not a ford fan. I was in my dirty posi blue R.

[Baz]

Passed you on the m54 earlier, car looks decent an im not a ford fan. I was in my dirty posi blue R.

Cheers, car is mega dirty, 5 weeks without a wash and near 2k miles haha. the R looked good :y:
Was just about to post on here to see who it was...now I know, was on my way back from footy in Wolvo, you in Telford?

[dan-sport]

Cheers, car is mega dirty, 5 weeks without a wash and near 2k miles haha. the R looked good :y:
Was just about to post on here to see who it was...now I know, was on my way back from footy in Wolvo, you in Telford?

Haha least your enjoying the car, naa live in wolvo was on the way to mrs moms in telford to pick a few things up. Tbh I ain't cleaned the R for about 3/4 weeks and horrible winter wheels make it naff better on the silver wheels. Cheers though :y:

[Baz]

Ah fair enough, might see you about abit then, play footy in Wolvo on Sundays and always up and down the M54 lol

[Baz]

Well woke up this morning and decided it was time for a change....

Car was filthy! So started to clean it a little :)

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0665.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0666.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0667.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0668.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0669.jpg

Pictures don't really show how bad it actually was lmao

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0671.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0670.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0672.jpg


The naked and dirty part :P ^^

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0674.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0673.jpg


And now for the finished article! Pics don't do it justice IMO, need a better camera other than my phone, might get some over Xmas!

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0681.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0680.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0677.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0678.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG0679.jpg


Opinions welcome, personally think it looks 100x's better, anyone else think it looked better with the stickers on?

[josh11490]

Looks a lot cleaner without the stickers on the side.

Car looks nice but i think I would have it a bit lower.

[UKtom]

+1 on the above comment

looks really clean and smart though mate, really like the rear diffuser! I want one for the mini but you can only get them on the 06 onwards plate :(

[JoeHindle]

Looks 100% better without the stickers!!

[Baz]

cheers ppl :) gonna try get some better pics with the missus' rents SLR over Xmas period, my phone just makes it look pink lol

[GolfJay]

I cannot stand these cars whatsoever. I do really like yours though so you must be doing something right dude!

[Jay_]

you're making me consider one of these... :S

Looks good mate :y:

[Baz]

I cannot stand these cars whatsoever. I do really like yours though so you must be doing something right dude!


you're making me consider one of these... :S

Looks good mate :y:

Thanks Jays, onwards and upwards, more to come after Xmas hopefully :p

[Badgersport]

Looking much better without the stickers. I purchased a blue festa st this morn. Wouldn't mind a listen to your car with filter on.

Ste

[m11ler]

Looks good man, is there any way you can darken the front lights on these?

[Baz]

Looking much better without the stickers. I purchased a blue festa st this morn. Wouldn't mind a listen to your car with filter on.

Ste

Yeah if you want buddy, not back in Telford now till after New Year though

Looks good man, is there any way you can darken the front lights on these?

Cheers pal, erm yeah there is, would look something like this:
Dannyjays Zetec S

http://i36.photobucket.com/albums/e15/digitalsuperstar/My_Car2/07-08-2012/IMG_6280.jpg

[Gandi699]

Looking much better without the stickers. I purchased a blue festa st this morn. Wouldn't mind a listen to your car with filter on.

Ste

Wasn't my mate Wills old MR200 was it? He just sold that and replaced it with an s2000

[leeroybrown]

So much cleaner with the stickers removed.

[Baz]

Not done anything with the car since the last update but drive it....covered the best part of 35k in 2 years but now live 3 miles from work I could spend some more time with it.

Firstly had a little wash and as I need some new tyres fairly soon (all 4) so decided to buy some wheels instead!

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG1744.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG1745.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG1766.jpg
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG1767.jpg

With Eagle F1 tyres with plenty of tread for £250

[Jamie]

Good choice on wheels they will look verrrry naicccce when fitted!

Looks cleaner without the decals but you don't see many with them now days!

[Baz]

Quick pic.....

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG1776.jpg (http://s40.photobucket.com/user/baznett/media/Fiesta%20ST/IMAG1776.jpg.html)

[mattknight1984]

Tyres look pretty low on tread in that pic...

[stevo1600]

Nice car that,

Looks waaay better on the leggeras baz, and without the stickers.

[Baz]

Opinions on the OZ Racing stickers?

http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG1786.jpg (http://s40.photobucket.com/user/baznett/media/Fiesta%20ST/IMAG1786.jpg.html)
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG1785.jpg (http://s40.photobucket.com/user/baznett/media/Fiesta%20ST/IMAG1785.jpg.html)
http://i40.photobucket.com/albums/e242/baznett/Fiesta%20ST/IMAG1787.jpg (http://s40.photobucket.com/user/baznett/media/Fiesta%20ST/IMAG1787.jpg.html)

[qrty]

I think they might look good in white?

[craigyt]

They look good as they are but i think the car needs to be lower!

[Badgersport]

Saw you earlier leaving Shifnal i did wave but not sure if you saw me. Car is looking good on the new wheels. !! Any other plans ?

Ste

[Baz]

Yeah I saw you on my way out, but didn't know it was you, didn't see you wave either.
No plans really at the minute, wanna try n swap the exhaust as I'm just not a fan of the slash cut

[L33h]

To be honest, I think the wheels look too small. Imo it looks better on the originals.