VTS wheels fit lowered VTR without rubbing?

[Jake]

As title says, im lowered 50mm at the front and around 60mm at the back of my VTR. Looking to put VTS wheels on, would these fit without rubbing as i dont have tyres on them yet and dont wanna buy tyres to then find out they rub?

Thanks

[mlawlan69]

45 profile and you should be ok, im down 40mm and dont rub at all even with 20mm spacers at the back.

[Liamjrhodes]

Hello, i had vts alloys on my furio which is lowered 70mm ish at the back and 65mm at the front and they rubbed slightly on full lock but other than that they were fine

[Jake]

Hello, i had vts alloys on my furio which is lowered 70mm ish at the back and 65mm at the front and they rubbed slightly on full lock but other than that they were fine

did you have 45mm low profile tyres too?

[Liamjrhodes]

did you have 45mm low profile tyres too?

Sorry yeah had 195 45 15's on it

[Jake]

Sorry yeah had 195 45 15's on it

cheers pal

[jeffchiz]

im down 60 mm on 45 profiles no problems at all

[rey]

As long as you use standard profile tyres you should be fine.

Unless you're silly low obviously

[Gandi699]

I'm on 50 profile 888s on 15s, 50 mm on the back and 35mm up front - doesnt rub

[wingnuts]

I was lowered 50 all round with vts rims and on my old vtr and I was fine never had a problem