PDA

View Full Version : mk2 vts none start after gearbox change..


marty80
3rd October 2012, 09:46
Hi there alll, well ive currently just took the grar box out and replaced with brand new clutch and a reconditioned box. The problem im now having is the car turns over but doesnt seem to wanna start. what could this be caused by??

Thanks and any info would be great ;)

Llardy
3rd October 2012, 09:49
have you pressed the fuel cut off switch (red button in the engine bay near the fusebox)

marty80
3rd October 2012, 10:02
yes sure have mate. there is fuel getting to the engine.. could this be my immobliser ?

marty80
3rd October 2012, 10:04
or wouldnt the immobilissr stop the fuel getting to the engine??

Llardy
3rd October 2012, 10:08
not sure on the mobiliser, but are all the earth connected on the gearbox? one of my earths was left off on mine and the engine wouldn't start.

rich112
3rd October 2012, 10:13
Crank sensor plugged in?

marty80
3rd October 2012, 10:13
You might have a fair point there mate. it was starting fine before i dropped the box.. thanks ill go give it a go, fingures crossed. haaa

marty80
3rd October 2012, 10:16
yup crank sensor plug very secure but ill double check the wires once again. cheers

piggy123
3rd October 2012, 11:19
Ckeck the fusees to the fuel pump

stevo67
3rd October 2012, 11:24
Check the earths are all connected on the gearbox & too clean metal.