Furio Emmissions Fail - With Print Out. (HELP)

[rick_VTR]

hi guys, the other halfs furio fail MOT on emmissions the other day, bloke said it needs a cat? ive ordered a cat but not sure if any of the lambda sensors need changing?

heres the print out:

http://i1116.photobucket.com/albums/k566/rickycrone/IMAG0381.jpg

in regards to mods it has a 4-2-1 with the green plugged lambda plugged in and fitted to the manifold, then i fitted an underfloor cat and the blue plugged lambda is plugged in but just tied up in the bay to read clean air and not connected to the exhaust due to no hole to fit it lol.

the cat however was off a scrap car so probably nackered when i fitted it but was free so had to give it a go.

ive got a brand new VTS underfloor cat on the way so will this solve it or are any of the sensors nackered from those readings in the picture?

any help will be much appreciated!

cheers.

[Kenobi]

hi guys, the other halfs furio fail MOT on emmissions the other day, bloke said it needs a cat? ive ordered a cat but not sure if any of the lambda sensors need changing?

heres the print out:

http://i1116.photobucket.com/albums/k566/rickycrone/IMAG0381.jpg

in regards to mods it has a 4-2-1 with the green plugged lambda plugged in and fitted to the manifold, then i fitted an underfloor cat and the blue plugged lambda is plugged in but just tied up in the bay to read clean air and not connected to the exhaust due to no hole to fit it lol.

the cat however was off a scrap car so probably nackered when i fitted it but was free so had to give it a go.

ive got a brand new VTS underfloor cat on the way so will this solve it or are any of the sensors nackered from those readings in the picture?

any help will be much appreciated!

cheers.

Go Dynodaze for an MOT ;)

[rick_VTR]

thanks for the help much appreciated.

[rick_VTR]

:bump:

[welshpug]

plug both lambdas in, job done.

[rick_VTR]

they are both plugged in.

[wadoryu]

Most likely the cat, which on a furio isn't cheap.

[welshpug]

they are both plugged in.



:zainy: into the ruddy exhaust :panic:

[rick_VTR]

my old VTR passed with the second one out of the exhaust so shouldnt need it plugged in on this, plus, there is no hole in the exhaust to screw the second one in.

i will try it with the new cat on and if it fails still then can only be the 1st lambda sensor surely.

[rick_VTR]

forgot to update this.

car passed with a brand new VTR underfloor cat and fitted a new standard silenced centre section and back box. the cat was an ebay job at about £40 so probably need another one come next year but i will get over it.

centre section was £19 delivered brand new and back box was £23 delivered brand new.

cant complain :)