No gears

[rich112]

So... Fitted vts gearbox after all this time, after sorting alot of issue in the process I can get into gears when engine is off, but when engine is on and clutch engaged I can not get into any gear. Is this just down to clutch cable adjustment or more?

[Cam]

Clutch cable needs adjusting mate

[Dom]

I had an issue with a Gearbox not going into gear with the car on, turned out to be the release bearing at fault somehow?

[rich112]

Sure it can't be realease bearing. That's clipped on and pretty solid, if it was that then I would have play in the fork up and down.

[rich112]

Any other ideas anyone? Adjusted clutch cable right up and still no luck, its as if the clutch is always engaged.

[rich112]

So basically got the car into gears by taking all tension out of the clutch cable. Been on a 15 minute drive ranging up to 70mph, all fine but just high clutch. Got home engine off, went to turn on again and all gears gone again, then basically lost battery after a few more failed attempts at starting.