Removing indicator stalk

[chris205]

Tried to search on my phone but it's having none of it.

I appear to have a faulty stalk on my car and the horn and left indicator works intermittently.

Anyone any ideas how to do it? Cheers

[AzzAW93]

remove the plastics surrounding the steering column/ignition barrel by removing the 3 torx screws from the bottom.
then its pretty straight forward
undo the screw securing the stalk and unplug the wires. then slide it out of its mount :)

[stevo67]

Just remember when refitting to line the stalk up properly with the lug on the airbag ring,the lug cancels the indicators.Plus if not fitted right then you`ll snap the airbag ring.

[Manu]

don't remove just yet. Hover around with a hairdryer, these are prone to go off with excess humidity, so a replacement is not always necessary. Had this problem before on 4 different cars and a little heat sorted it.

[huricane]

http://www.saxperience.com/forum/showthread.php?p=2466438#post2466438
gives you rough idea

[Norm7446]

http://www.saxperience.com/forum/showthread.php?p=2466438#post2466438
gives you rough idea

At Section 11 of above : To save Fanning about with indicator Stock just take out the two torx screw's an slide it out of the way.
:drink: KISS Keep It Simple Stupid.

[Norm7446]

http://www.saxperience.com/forum/showthread.php?p=2466438#post2466438
gives you rough idea

At Section 11 of above : To save Fubaring about with indicator Stock just take out the two torx screw's an slide it out of the way.
:drink: KISS Keep It Simple Stupid.

[Norm7446]

Opppp'ssss