PDA

View Full Version : disastrous vts conversion


Ali123
3rd February 2013, 23:47
right as some of you may know ive done a vts conversion on my quicky,
both are 3 plug.

put engine in all well and good, i was told that the vts loom did not match the interior loom on the pug, but anyway we plugged them together and turned the car over, until it hydrolocked, took the plugs out , turned it over to get rid of all the fuel, and there was that much fuel a stream of fuel shot out from cylinders 2 and 4 litterally 2m high!

so we thought this can be todo with the whole loom splicing situation, so we got on it today and it turned out that the two looms do match! and now all 4 injectors are opening soon as you put the ignition on and continuously squirting fuel :(

also when i turn ignition off now and take the key out the hbrake light stays on!

dafuq! help! :(

Tom5190
4th February 2013, 00:20
Cant really give you any more input than i did on the phone bt if it gets to the point were you havnt sorted it and it really needs to be done just give my a text/pm and ill come up.

sexual favours will be needed though x

Ali123
4th February 2013, 00:22
Cant really give you any more input than i did on the phone bt if it gets to the point were you havnt sorted it and it really needs to be done just give my a text/pm and ill come up.

sexual favours will be needed though x

yeah man, i'll see what happens tomorrow, think we only have a clutch job booked in for the morning and possibly might be able to mess about in the after noon, either way i'll give you a text and sort something out, as it would be very useful having you come down mate!

just seen the white text, and that is not a problem sweetheart ;) x

mlawlan69
4th February 2013, 00:27
My boot is full to the brim with vts goodness right now and I'm nervous already, seeing this thread has just heightened that feeling ten fold :(

I really do hope I have a smooth conversion ;'(

Ali123
4th February 2013, 00:29
My boot is full to the brim with vts goodness right now and I'm nervous already, seeing this thread has just heightened that feeling ten fold :(

I really do hope I have a smooth conversion ;'(

dont worry man:)
yours'll be reet! :y: i just dont think the whole s into a pug is making my conversion any easier though!

LSOfreak
4th February 2013, 00:38
can you not just source another engine loom from the same year 16v?

Prickle
4th February 2013, 00:39
My boot is full to the brim with vts goodness right now and I'm nervous already, seeing this thread has just heightened that feeling ten fold :(

I really do hope I have a smooth conversion ;'(

When are you doing it?

Ali123
4th February 2013, 00:41
can you not just source another engine loom from the same year 16v?

i could do, but after forking out 70 quid for that loom id hate to think its fucked

mlawlan69
4th February 2013, 00:55
When are you doing it?

im not, but it's tomorrow :oops:

and ali, i hope your right mate, i'v spent shit loads of time sourcing everything etc, but chopping and changing shit will never be 100% so who knows !!

Ali123
4th February 2013, 00:56
im not, but it's tomorrow :oops:

ooooooooo! best of luck man, let us know how it goes!

Cam
4th February 2013, 00:57
im not, but it's tomorrow :oops:

and ali, i hope your right mate, i'v spent shit loads of time sourcing everything etc, but chopping and changing shit will never be 100% so who knows !!

You spliceing?

Tom5190
4th February 2013, 00:58
im not, but it's tomorrow :oops:

and ali, i hope your right mate, i'v spent shit loads of time sourcing everything etc, but chopping and changing shit will never be 100% so who knows !!

Whos fitting it for you btw matey?

mlawlan69
4th February 2013, 00:58
You spliceing?

tom 5190 has done it for me, but yes, couldnt find a 3 plug vts engine for shit so decide to go down the naughty route :(

cheers ali :)

tom, mark1311 from here is doing it, he knows his shit so i hope im not bringing him a car full of headaches and angst.

Prickle
4th February 2013, 00:59
All the best! :p

Tom5190
4th February 2013, 01:02
tom 5190 has done it for me, but yes, couldnt find a 3 plug vts engine for shit so decide to go down the naughty route :(

cheers ali :)

tom, mark1311 from here is doing it, he knows his shit so i hope im not bringing him a car full of headaches and angst.

Sweet, im sure it will be fine mate dont worry :y:

Ali123
4th February 2013, 01:05
Sweet, im sure it will be fine mate dont worry :y:

So yeah you shall be working your magic and sorting my car out yus?;) <3

mlawlan69
4th February 2013, 01:05
cheers boys, up early so off t' bed for me naaa'.

thread hijack sorry ali.

xxx

Cam
4th February 2013, 01:06
If Tom has done then you not need to worry his the man!

Tom5190 keeping conversions* going for 3/4 of saxp!

Tom5190
4th February 2013, 01:06
Yea mate if you cant get anywere it tomorrow and youve tried everything you can drop me a text and we will arrange a day for me to come up.

If Tom has done then you not need to worry his the man!

Tom5190 keeping conversion going for 3/4 of saxp!

hahaha

Bedford126
4th February 2013, 01:08
cheers boys, up early so off t' bed for me naaa'.

thread hijack sorry ali.

xxx

Mark just texted me and he is pissed off his head he said hes gonna be hung over to fuck tomoz.


Good luck with that one mate!!!! ha ha ha ha:y:

mlawlan69
4th February 2013, 01:10
Mark just texted me and he is pissed off his head he said hes gonna be hung over to fuck tomoz.


Good luck with that one mate!!!! ha ha ha ha:y:
:y:

cheers mate.

Bedford126
4th February 2013, 01:13
:y:

cheers mate.

I'm ripping ur balls just hope it works out for ya after I recommended him. Just watch out for the average speed cameras on the m1 just after cedar court exit to barnsley they are on and they do work i know what its going to be like driving home for u..

hillyberry2009
4th February 2013, 10:08
Hope you sort it out bud.