New Bumper hanging low!

[BennWilson]

http://farm9.staticflickr.com/8108/8464520187_70b13a1ea2_c.jpg (http://www.flickr.com/photos/bennwilson/8464520187/)
SpaxoNewBonnet (http://www.flickr.com/photos/bennwilson/8464520187/) by BennWilson (http://www.flickr.com/people/bennwilson/), on Flickr

The bumper won't sit right in the middle. Any ideas?

[Tom5190]

Is it slotted on the white mounts correctly? check they are in the correct place in the slam panel. you have the 2 10mm bolts in the bottom of it that bolt to the bottom of the crossmember?

[Cam]

Check your chassis end plates are straight

[mlawlan69]

Two white plastic hangars at the dront ,make sure its pushed well into those at that helps pull it up.

[BennWilson]

Only got one, and it's not in the slam panel, will get another one from scrappys and try that

[Prickle]

use cable ties, lad.

[BennWilson]

Got none, lad. They're holding the sides in doe (It's a VTR/S Bumper)