PDA

View Full Version : help! eletrical fault on my 1.4?


dan-the-saxo-man
19th February 2013, 10:45
I recently done a engine swap I had a 1ltr saxo "open scandle" an put a mates 1.4 106 quicksilver engine in it and full loom, all works fine till yestaday, first time a had to use my lights an realised first click on my lights all my indicaters came on signal left or right and both flash opposit is dimmer and when lights r on I have braek lights an reverse lights on aswell, oviusly a eletrical problem now today the car won't start atall??? Has any1 had this problem befor? Iv checked for bad earths and all is fine checked wiering from lights to switches an still won't start, if any1 has any info on this it would be great, thanks

Ross
19th February 2013, 10:53
what loom did you use? A full engine and interior loom, or just an engine loom?

dan-the-saxo-man
19th February 2013, 18:57
I used it all mate, from back lights straight through to the dash and from dash to the engine bay and the engine loom aswell and obviusly ecu, key, ingition ect, it was runnin fine other than the lights, iv been workin onit all day an It seems like its not fuelin now? Still the same problem with the eletrics but not fireing up :-(

Jonesy_VTR
20th February 2013, 15:26
Is the fuel pump kicking in when u turn the ignition on and the light problems sound like a bad earth