Not a saxo but gti

[Bandy]

Basically the car is running on 2 cylinders the 2 middle ones ain't firing ... Tried different plugs and brand new coil pack . Still nothing . Was fine other day then went while I was driving .? Any suggestions

[blackie_2k5]

its either not spaking.. or not getting fuel to those cylinders

have you checked its sparking on those two?

[Bandy]

It's sparking yes .... In the process of trying to remove inlet top hat to have a look at injectors ... Anything else should maybe check

[blackie_2k5]

check injector loom

it should have an igntion live.. and batched earths, its probably lost the earth for cylinders 2/3

[m4tt274]

if its sparking, then its not getting fuel. if its both cylinders, and it happened simultaneously i would be looking into the loom.

[Bandy]

Yeah both at same time ... Shall investigate in morning if I can get those bloody 2 bolts underneath off grrrr ha

Thanks guys

Right so got the top hat off to check the injector loom and my mate tested them and all reading equal .... Any other suggestions as what could possibly be ?

[MartinObviously]

Right so got the top hat off to check the injector loom and my mate tested them and all reading equal .... Any other suggestions as what could possibly be ?

compression test?

Head gasket may have blown between the 2 cylinders. :y:

If you've got spark, and you're getting signal to the injectors it has to me something mechanical? Logically.

[Bandy]

Yeah my mate said that's next step compression test .. Cheers see what's what next weekend now

[Gandi699]

Have you had the injectors out and the rail and tested them out of the head?

[Saxdaniel]

Think someone mentioned injectors? Have to check if they working?


Sent from my iPhone using Tapatalk

[Bandy]

Not tested those injectors yet as just strange that 2 have went .. And it is the firing order 2&3 that not working ... May swap them around at weekend just too rule it out ..

[Saxdaniel]

Always worth a try mate :)


Sent from my iPhone using Tapatalk

[Marv_106]

I'd put money on it being injectors. 2&3 are fired at the same time, so if ones shorting, the other wont work.

Just pull them out of head and turn it over all attached to fuel rail and loom, soon see if fuel is coming out.

[Bandy]

Will try it Friday nightmare thanks

[Bandy]

Night *

[Bandy]

Just so everyone that helped knows it was the injectors replaced them and now running fine :-D thanks for help guys