Passenger door vt kit problem

[Ben_SaxoForte]

Ok the vt kit that's clipped to the passenger door on my car is loose well not like its falling off but I have a gap at the top of the bump strip about 4-5mm, took the kit off and all the metal brackets but one fell off with it so I glued them all back on and put on new clips, clipped it back on and the gaps still there!? I know I'm being picky but things like that annoy me.. Should I just get some tiger seal or something and stick it on?

Cheers

[GTID]

yeah tiger seal it an clamp it on over nite .. gotta do it to mine the rear quarter arch tho .. my local shop wants £12.50 for a tube .. just went on ebay an it vary's from 3.50 - 6.99

[Ben_SaxoForte]

Ok guess ill give that a go then seems my best option since the clips obviously aren't doing the job!

[returnofjim]

yes tiger seal is probably your best option.

[b63_vts]

yes tiger seal is probably your best option.

plus 1 just done mine and its back to normal and wont be moving again:y:

[ragitaround1]

heeeeeeelp!! lol central locking not working from the fob but works with direct use ov the key in da lock, where can i find the remote sensor in the car saxo mk2, its not in the center light area & im aware that there is a long black box behind the fuses under the dash. not sure if that box is the sensor?. there is also a tiny black box that is wired to the loom in the engine bay which is bolted to a bracket near the thermostat on the head, is this the sensor for the cl?

[dontpannic]

Sure it's not just the batteries in the fob?