Torx socket size VTR head bolts.

[Old_Drew]

Hi all, does anyone know the size of the torx socket i need to remove & fit head bolts on my vtr

[Bobo0907]

E14 is what you need. Better to buy a set though, surely?

[Old_Drew]

Thanks for that Bob, will buy tomorrow and start job and see what i can break.

[stigsdump]

you'll also need a angle dial guage to re-tighten the new ones in addition to a torque wrench

[axsaxoman]

20nm,s first ,then 240degrees rotation

[Gandi699]

As above, although I did it 120 degrees on all in order first and then 120 on all again?

[Old_Drew]

Thanks for the info job done but now it won't start. Not even trying to turn over just alot of clicking noises from ecu area.

[Gandi699]

wires on the starter correctly? I

[AlexB]

Or a bad earth to something like the gearbox/chassis

[stigsdump]

flat battery with doors being left open and interior light draining battery....try jump leads and see if it turns over then