PDA

View Full Version : Guess the plugs


Jam3s
14th April 2013, 19:25
Admittedly not as fun as it sounds :homme:

If anyone could shed any light it would appreciated

I'm matching up a mk1 saxo vts loom to a 98 reg 106 gti loom. I'm making sure all the plugs are the same having compared them and wrapped taped around the ones that were the same but I have a few left over that don't appear on both looms. I understand some may be on the interior loom instead but knowing what the plugs are would help me a lot.

Firstly the mk 1 saxo:

1.

http://i886.photobucket.com/albums/ac65/Kona_206/IMG_0604_zps0b7e4788.jpg (http://s886.photobucket.com/user/Kona_206/media/IMG_0604_zps0b7e4788.jpg.html)

Not too important, guess it's just a fuse box connection that is located else where on the 106


2.

http://i886.photobucket.com/albums/ac65/Kona_206/IMG_0605_zps244029e4.jpg (http://s886.photobucket.com/user/Kona_206/media/IMG_0605_zps244029e4.jpg.html)

Located at the very start next to the chassis plug, I'm guessing it's for the fan which is located on the interior loom for the 106.


3.

http://i886.photobucket.com/albums/ac65/Kona_206/IMG_0606_zpsecc6cf38.jpg (http://s886.photobucket.com/user/Kona_206/media/IMG_0606_zpsecc6cf38.jpg.html)

3 pin brown plug comes out of the main loom at the same point as the fuel rail plug but is long so could stretch quite far. Not sure on this one




Then for the 106 gti:

4.

http://i886.photobucket.com/albums/ac65/Kona_206/IMG_0602_zpsdbff6203.jpg (http://s886.photobucket.com/user/Kona_206/media/IMG_0602_zpsdbff6203.jpg.html)

Black 2 pin - There are a couple that look similar but this one comes out with the throttle body sensors but again is long so can stretch elsewhere.


5.

http://i886.photobucket.com/albums/ac65/Kona_206/IMG_0603_zps1a14554c.jpg (http://s886.photobucket.com/user/Kona_206/media/IMG_0603_zps1a14554c.jpg.html)

And finally a damaged blue plug also comes out next to the throttle body sensors but only has one wire.


Thanks guys

ns9900
16th April 2013, 12:31
AlexB has recently done some work either the same or the opposite to you so try him. i think he did the same as i remember him saying that there are cables the have come up considerably longer then needed