gear box

[morgan1501]

right everyone

just a quick question for yas

if i need to top up my gear box i can just fill it from the top cant i ?

ive been told to fill it there but wont that over fill it. as im only ment to put 2 2.5l in to it.

and the filler hole is near the bottem

or is all this wrong


please help.:wall:

[Ross]

easiest way is to fill from the side until it flows out. Then put the bung in and you're good to go.

[Cam]

Its 2L not 2.5.

[morgan1501]

how can i check if there is inough in the bear box

[Cam]

Sorry?

[Ross]

on the end of the gearbox there's a round headed bolt with a square middle. one upper and one lower. the lower one is to drain the oil out and the upper is to re-fill/ check the oil level.

You need a 5mm square headed socket, undo the upper bolt and oil should dribble out. If it doesn't then it needs topping up...

[greyjasper51]

on the end of the gearbox there's a round headed bolt with a square middle. one upper and one lower. the lower one is to drain the oil out and the upper is to re-fill/ check the oil level.

You need a 5mm square headed socket, undo the upper bolt and oil should dribble out. If it doesn't then it needs topping up...

8mm iirc :hug:

[Ross]

My bad!