Aaron
9th July 2013, 13:43
Took the trailing arms off and regreased the pin, a fair amount of grease
Then put all back together ( lowered it at same time)
Problem---- the rear moves
Up and down very easily , not hard & one side is now a lot lower
Arb is connected, but doesn't make hardly no difference to movement
When I dropped it to ground, both dropped fine then later one side dropped ridiculous amounts more
Any ideas?
Video to show what I mean?
They are the smallest torsion bar and smallest arb 3 stud ones.
http://i182.photobucket.com/albums/x75/aaront1234/53D01C17-CDDF-44BE-9D66-BDB4955C5B3B-21652-0000099386D01E8D_zps8863d31b.mp4
Then put all back together ( lowered it at same time)
Problem---- the rear moves
Up and down very easily , not hard & one side is now a lot lower
Arb is connected, but doesn't make hardly no difference to movement
When I dropped it to ground, both dropped fine then later one side dropped ridiculous amounts more
Any ideas?
Video to show what I mean?
They are the smallest torsion bar and smallest arb 3 stud ones.
http://i182.photobucket.com/albums/x75/aaront1234/53D01C17-CDDF-44BE-9D66-BDB4955C5B3B-21652-0000099386D01E8D_zps8863d31b.mp4