Dashboard stuck :(

[dalesvtr]

Hi guys me an my bro are trying to take the dash out of my saxo vtr mk2 to get to the heater matrix followed both guides on here and it still seems 2 be stuck at the top of the dash thats near the windscreen, its loose st the bottom but wnt budge at the top, NEED HELP PLEASE GUYS.

[Cam]

Iirc there a few bolts under the bonnet?

[kylebailey]

scuttle panel, and windscreen wiper motor out. undo 3 bolts

[Paul]

As said, behind the window wipers/ in the skuttle panel, 3 bolts, one at each side and one in the middle.

Can be fiddly getting driver side one out.

[dalesvtr]

They are all out chaps all waht was said, wiper motor scuttle ect ect

[filiperosa]

After that 3 it is also one small that connects to the heater.

[dalesvtr]

A torq one underneath ive done that too

[dalesvtr]

Do I need to push the fan the one that underneath the scuttle through? And il take pics 2moz guys to show you

[filiperosa]

The fan can stay there, it is the other on the sides

[dalesvtr]

Hi filiperosa where to exactly? I got a hynes manual coming itl be here a week 2moz I was hoping on having it done by then

[kylebailey]

have u took the indicator stick out lol i know it sounds stulid but i had this problem with mine till i realised it wasnr coming out because they were holding it back

[kylebailey]

where the indicator stick and windscreen wiper stick cones ffrom steering colomn

[holdawayt]

A dictionary.










Add one to your Christmas lists chaps.

[kylebailey]

lol shut up you cock

[holdawayt]

Hahahaha

[dalesvtr]

Yea ive taken them off kyle, and no joe I aint done that, are they the 2 bars that run from the steering column under the dash? If so I didnt know they had 2 come out, also I aint got a clue how :/

[welshpug]

RTFM dude!

[dalesvtr]

Thanks joe. In English welsh pug ? ? ?

[dalesvtr]

Hi joe them bars dont seem to be stoping the dash, the bottom of the dash moves but the top is stuck seems more solid by the drivers side above where the clocks are. Il upload pics soon

[dalesvtr]

I just loosened the bars and the dash is more freer. However its still stuck at the top near the windscreen, me and my brother cant see how tho, another question, does the heater unit (part with the filter in) have to be removed before the dash or later?

[dalesvtr]

http://i1296.photobucket.com/albums/ag6/daleevs/Mobile%20Uploads/20131116_124911_zpsfef8812e.jpg (http://s1296.photobucket.com/user/daleevs/media/Mobile%20Uploads/20131116_124911_zpsfef8812e.jpg.html)URL=http://s1296.photobucket.com/user/daleevs/media/Mobile%20Uploads/20131116_124907_zps01ddf75f.jpg.html]http://i1296.photobucket.com/albums/ag6/daleevs/Mobile%20Uploads/20131116_124907_zps01ddf75f.jpg[/URL]

[dalesvtr]

http://i1296.photobucket.com/albums/ag6/daleevs/Mobile%20Uploads/20131116_125008_zpsf7675f36.jpg (http://s1296.photobucket.com/user/daleevs/media/Mobile%20Uploads/20131116_125008_zpsf7675f36.jpg.html)URL=http://s1296.photobucket.com/user/daleevs/media/Mobile%20Uploads/20131116_124950_zpsfda40838.jpg.html]http://i1296.photobucket.com/albums/ag6/daleevs/Mobile%20Uploads/20131116_124950_zpsfda40838.jpg[/URL]

[dalesvtr]

GREAT SUCCESS :) all bloody done. Yea you were rite joe there were three rite under neath soon as they wer done off she came, and tbh I rate that job very easy to complete :). I cleaned the heater matrix out noticed it started off rusty then went clear as to water colour. The over all condition looked new. I really hope this cures the overheating problem. When I took the heater matrix off there was no water in there or maybe a drop or two. Im still weary that the water is not geting there, even though I bleed the rad nipple then thermostat, then the bleed valve by the heater matrix, once ive made sure all the air is out in order I do them up, the fans blow a lil hot air then go cold, not long after Ive pulled off say 4 mins the heater gauge goes to half way then over then the fan comes on, when I go back home to bleed the system again the 1st bleed nipple on the rad has tons of air by it and hisses for a while :(. Thats waht normally happens but I havent tried it since ive done the heater matrix, so any advice in advance guys ? ? ?