airbag wires the correct way around

[Morgiee]

Hi ive snipped the plugs off on the airbag system and some of the plugs are missing so cant be 100% which colour wire went were. Is their a way i can test that the air bag wires are the correct way around? i have the following faults:

Permanent fault: seatbelt trigger 1 open circuit

Permanent fault: seatbelt trigger 2 open circuit

Permanent fault: seatbelt deployment

Permanent fault: battery voltage

Airbag warning lamp short circuit to –ve or open circuit


The wires are just crimped at the moment

[stevo67]

Have sent you a pm mate.

[Morgiee]

Thanks that should fix the following problems:

Permanent fault: seatbelt trigger 1 open circuit

Permanent fault: seatbelt trigger 2 open circuit


Just need the others sorting now

As for the connector under the dash on the passengers side could you see what colour order yours are in as i didnt cut the drivers air bag side only the ones under the seats and the one behind the dash.

Thanks

[Morgiee]

Went and bought an entire replica airbag system from a donor saxo just getting stripped. All wires and connectors in tack. Installed it to mine and airbag light is STILL ON!!!!!! just stays still were before it was flashing. Faults still coming up are before baring in mind no wires are tampered with and the airbag system has NEVER been in a collision:


Permanent Fault: Drivers module trigger open circuit

Permanent fault: Seat belt 1 short circuit

Permanent fault: Seat belt 2 short circuit

Airbag warning lamp short circuit to -ve or open circuit.



Why are these still coming up? looks like im going to have to take it to an auto electrician. My MOT is due in 20 days and im working most of it :wall::wall::wall::wall: