Front speaker wires

[m67]

Hey i wanna have my crossovers in the actual car in the footwells instead of having it rataling about inside the door, so i think the best way to do this is to cut the speaker wires before they go into the block connector of the door, only problem is identifying which wires to use, because in the actual door they are green and pink but before the block connector there is no pink.. so what wires do i use?

[DaveWard]

Best way to do it is rewire the lot!

Alternative is why not screw the crossovers to the rear pocket on the door?

[m67]

can u tell me anyway ;)

[DaveWard]

No sorry I wont tell people how to bodge things.

Quaility sounding installs are a big part down to a good installation noy just good products.

[YM03]

try reading a thread a phew down from here, as I've shown how to do it proply with photos, and it's not hard

edit just relised you started that post!!!

[m67]

thanks chriss but that doesnt really help me in what im trying to do now.

Basically i want to put the crossover inside the car so that means cutting the wires before it goes to the block connector and putting those in the input of the crossover then for the mids i will connect to wires i just cut, so they go through the block connector which is then wired to the mids obviously,problem is what colour are the wires which i need to cut, as they are green and pink inside the door but there is no green and pink on the loom before the block connector inside the car...

[YM03]

I don't know the answear to that mate as I don't use the normil wire, so I've got no idea

[m67]

eeek... anyone?

[Baz]

i got my cross over drilled into the rear door pockets like so:

http://i40.photobucket.com/albums/e242/baznett/131_3161.jpg

[Donphan]

cant you cut the wires off straight after the iso block? Then run new wire from there.

[stentor]

Which color pink or green is positive and vice versa?
Thnx.