PDA

View Full Version : Polybushes on my VTR


jordyn89
11th February 2014, 11:09
Hi Guys

Quick couple of questions regarding polybushes.

I think my front wishbone bushes are going because theres some terible knocking coming from the front when i go over bumps in the road etc. I will have a closer inspection at the weekend but im guessing its this as i had the same issue in my dturbo.

Im thinking if they are going, i might aswell upgrade rather than put standard bushes back in. Im on the Polybush website at the minute and im planning on replacing the bushes at the front.

http://i.imgur.com/Tu0RUFb.jpg

Looking at the above diagram, i need to order the following:

2 x 39D
2 x 39F
2 x 39A (ARB Bushes)

http://www.polybush.co.uk/shop/view/401_Saxo/371_Kit_91_

The next im unsure about as on the website, it shows the 22mm ARM Bush as well, where in the world does this go and is it worth replacing for the sake of £20?

I realise that full kit could be bought for 200 but im not replacing the rears until i replace my axle as it has some slight camber on.

Can anyone shed some light? :wall: