Any interest in a Group Buy on Top Mounts?

[D4MJT]

So,

I like these:

http://www.kamracing.co.uk/car-tuning/citroen/citroen-saxo/saxo-suspension/bushes-mounts/citroen-saxo-kam-racing-solid-top-mount-set.html

They look sexy. MuZiZZle fancies some too. Does anyone else? I might speak to the guys at Kam and see if we can sort out a group buy if there's enough interest?

I haven't spoken to them yet, so there's literally nothing in place, but I thought I'd gauge interest first in case no-one wants any and I end up wasting their time.

[chompy]

I'd be up for this depending on price. Can get the compbrake/shenpar kits for £100 so would need to be around that/less.

Unless there is a substantial difference between these and the aforementioned competitors, but I can't seem to see anything so far.

Kev's input would be needed tbh, I'd PM him with the link to the thread.

[smiith]

nah...

[D4MJT]

nah...

I hear you can use these to recover old sex tapes from HDD's?

[D4MJT]

I'd be up for this depending on price. Can get the compbrake/shenpar kits for £100 so would need to be around that/less.

Unless there is a substantial difference between these and the aforementioned competitors, but I can't seem to see anything so far.

Kev's input would be needed tbh, I'd PM him with the link to the thread.

I've dropped him a PM :)

[smiith]

I hear you can use these to recover old sex tapes from HDD's?

I can, and have :y:

[deano_123]

I'd be up for it

I also want turret strengthening plates but they cost nowt

[D4MJT]

I'd be up for it

I also want turret strengthening plates but they cost nowt

I could do with these also, as I'm shit and bent my VTS

[D4MJT]

So potentially so far then

1) D4MJT
2) MuZiZZle
3) Chompy - Price dependent
4) Deano_123

[qrty]

Wrong Section...
Trololol

[deano_123]

I could do with these also, as I'm shit and bent my VTS

are/ have you stitch welded your bay whilst the engines out?

[Mickswan]

Me, price dependant.

[Brettles1986]

Will they make a Kalos as cool as a Saxo?

[D4MJT]

are/ have you stitch welded your bay whilst the engines out?

Ish. A bit.

[D4MJT]

Wrong Section...
Trololol

:homme: ;)

trolololol back atcha

[Giraffe]

Wrong Section...
Trololol

It's because he's being shit today.

[chompy]

Any input from Kev?

[Andy_K]

I'd potentially be in if the price was good

[Prickle]

No but.. i would be if it was a group buy on 266 or284mm Wilwoods or Hi Specs. Aye. :P

[MuZiZZle]

No but.. i would be if it was a group buy on 266 or284mm Wilwoods or Hi Specs. Aye. :P

Don't you drive at 7mph? :homme:

[Prickle]

150mph

[MuZiZZle]

150mph

I'm not on about Gran Turismo man, you hom

[D4MJT]

Any input from Kev?

Alas not, PM'd him as well.

[KamRacing]

I'll look into what price we can do a group buy for. These are better than Compbrake. When designing them we had two choices. We could have gone for cheap bearings and beaten or matched Compbrake, or fit a high quality bearing which will last a lot longer. Guess what we chose!

Kev

[chompy]

I'll look into what price we can do a group buy for. These are better than Compbrake. When designing them we had two choices. We could have gone for cheap bearings and beaten or matched Compbrake, or fit a high quality bearing which will last a lot longer. Guess what we chose!

Kev

The cheaper one? :p

[deano_123]

I'll look into what price we can do a group buy for. These are better than Compbrake. When designing them we had two choices. We could have gone for cheap bearings and beaten or matched Compbrake, or fit a high quality bearing which will last a lot longer. Guess what we chose!

Kev

Kam man, I need your input on proper suspension. What do you recommend on a track car I'm likely to take out about 5 times a year? Full of multi adjustables or something half decent?

[chompy]

Kam man, I need your input on proper suspension. What do you recommend on a track car I'm likely to take out about 5 times a year? Full of multi adjustables or something half decent?

Get your own thread!

[deano_123]

Get your own thread!

get your own life, bummer. i was like one of the first to put my name down

my balls, your mouth

[josh11490]

I'd be up for it

I also want turret strengthening plates but they cost nowt


Any chance you can put up a link for these please?

[deano_123]

Any chance you can put up a link for these please?

www.gmcmotorsport.co.uk

were around 15 quid each last time i looked into it

[josh11490]

Cheers mate will look now

[josh11490]

www.gmcmotorsport.co.uk



were around 15 quid each last time i looked into it

Just looked, they're universal and £35 now :/

[chompy]

get your own life, bummer. i was like one of the first to put my name down

my balls, your mouth

I'd cum all over your face.

[Prickle]

I'm not on about Gran Turismo man, you hom

Wot

Chris, set a brake one up.

Im in ;) b2b group buys. Make it happen

[chompy]

Just looked, they're universal and £35 now :/

Spoox do them for £20

[MuZiZZle]

Kam man, I need your input on proper suspension. What do you recommend on a track car I'm likely to take in and out of my garage about 5 times a year? Full of multi adjustables or something half decent?

Corrected that for you, gaylord :homme:

[KamRacing]

The cheaper one? :p

Wheres the like button you cheeky git?

[chompy]

Wheres the like button you cheeky git?

Haha :)

[KamRacing]

I'm getting a batch of top strengthening plates made up at the moment. I will get you guys a price on them too...

[KamRacing]

Kam man, I need your input on proper suspension. What do you recommend on a track car I'm likely to take out about 5 times a year? Full of multi adjustables or something half decent?

PM me. It depends what your car setup is really. I will need to know the car spec chassis wise and what tyres you plan to run. If you are running full slicks you need something that can cope with the extra side loads for example.

Kev

[chompy]

any prices yet Kev, would be interested to get some at the end of the month?

[MuZiZZle]

Me too!

[stevie_m]

Could be interested depending on price

[chompy]

C'mon.....

[MuZiZZle]

Kammmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm ?!?!?!

[chompy]

http://troll.me/images/y-u-no-guy/y-u-no-reply.jpg

[chompy]

C'mon. I want some next week.

[MuZiZZle]

Kammmmmmmmmmm

[chompy]

Someone should pm him...

[chompy]

I've Pm'd him

[D4MJT]

I've Pm'd him

I've still had no reply to my original PM dude, I dunno what's up there at the moment but they seem very busy or distracted.

I've had no problems previously with Kam at all, bought quite a bit from them, it'd be nice to know either way if this was a runner or not though, or even just an update to say 'in a few weeks' or something.

[MuZiZZle]

I've still had no reply to my original PM dude, I dunno what's up there at the moment but they seem very busy or distracted.

I've had no problems previously with Kam at all, bought quite a bit from them, it'd be nice to know either way if this was a runner or not though, or even just an update to say 'in a few weeks' or something.

Maybe they just don't like you?

I don't

[D4MJT]

Maybe they just don't like you?

I don't

Your mam does though :homme:

[MuZiZZle]

Your mam does though :homme:

She doesn't

[deano_123]

I've still had no reply to my original PM dude, I dunno what's up there at the moment but they seem very busy or distracted.

I've had no problems previously with Kam at all, bought quite a bit from them, it'd be nice to know either way if this was a runner or not though, or even just an update to say 'in a few weeks' or something.

you have phone?

[MuZiZZle]

you have phone?

I know you're from Crammy but Jesus man!

[chompy]

Had a reply from Kev. He's busy as fuck but hopes to have a price for tomorrow

[KamRacing]

Sorry. I'm pretty snowed under these days. We've had a bit of a restructure so Jon works solely on the website backend while I run the rest of the business. Great in theory but I need big sheets of paper for my to-do list. This task got lost next to a doodle of a fraggle (one for the older lot).

I can do a group buy price of £125 delivered. Saving you £24
I cannot match off inferior quality parts from competitors i'm afraid, my bearings cost too much. I chose the best quality ones I could get rather than cheap ones at 1/3rd of the price.

Kev

[MuZiZZle]

4 of us are from Newcastle! combined postage FTMFW

and for D4, here's a combined harvester (he's a rural bender)

http://upload.wikimedia.org/wikipedia/commons/1/1e/Claas-lexion-570-1.jpg

[chompy]

I'd be up for that kev! Do you need an agreed number or can we just buy them? Also, your website seems to want to charge £20 delivery even though I'm not in a high postage area

[MuZiZZle]

I'd be up for that kev! Do you need an agreed number or can we just buy them? Also, your website seems to want to charge £20 delivery even though I'm not in a high postage area

That's just because he doesn't like you, it's £40 for D4MJT

[chompy]

Well, that's understandable. I'm quite a cunt.

[D4MJT]

Sexy, I'm all over this

[chompy]

http://img.tapatalk.com/d/14/03/27/udu6uvu5.jpg

[D4MJT]

I've set up a thread in Group Buy - please stick your name down in there if you'd like to order.

http://www.saxperience.com/forum/showthread.php?p=6436720