Wheel nut for NIK-L

[AZZ-VTR]

http://i1091.photobucket.com/albums/i392/ahunter122/656C6052-9E9A-4A9C-B8E8-B78D1B606AAC_zpshofuft9x.jpg



This is the best pic I could get bud. :panic:

[AZZ-VTR]

http://i1091.photobucket.com/albums/i392/ahunter122/656C6052-9E9A-4A9C-B8E8-B78D1B606AAC_zpshofuft9x.jpg (http://s1091.photobucket.com/user/ahunter122/media/656C6052-9E9A-4A9C-B8E8-B78D1B606AAC_zpshofuft9x.jpg.html)

[AZZ-VTR]

http://i1091.photobucket.com/albums/i392/ahunter122/1E8F383F-2106-4210-8923-4269554524B9_zpsndek6end.jpg (http://s1091.photobucket.com/user/ahunter122/media/1E8F383F-2106-4210-8923-4269554524B9_zpsndek6end.jpg.html)

I managed to get this one off, little bit better picture

[Nik_L]

As said in the PM bud, the spacing between the top left and top right holes isn't as big on the key i have. They are more evenly spaced out.

[ThrushMotorsport]

Have you lost your key or something?

If you have and want to get them off, a little trick is.. a 13mm long socket, bang the fucker in to the circle bitty in the middle of the locking nut with a hammer so it wedges in, and undo.. works for me with these bolts :)

[AZZ-VTR]

Ok mate no worries guys.

13mm long socket you say?

The bolts look and feel like they have been put on with a bloody air gun or a scaffolding bar!

You sure it will grip enough?

[chris1357]

I had to remove these kind of one's today :(
Use the sizes of sockets I went from 13-12-11.. Took me 20 minutes to do the 4.
Chris.