Vts won't start!

[PeterV10Vts]

Recently done a Vts conversion on my vtr I have swapped the engine gear box the engine loom and interior loom over and nothing the car just cranks over but won't fire the fuel pump will not prime and I have no spark the engine was working fine in my Vts so I'm stumped
Here's what I've tried
Cleaned all earths
Checked coil pack and crank sensor
Checked all fuses
Ecu is unlocked
I have removed the IMO box under the dash
Checked the fuel relay under the ecu
Checked all connections plugs etc
If anyone could help it would be fantastic!

[Gandi699]

Crank sensor and maybe fuel pump relay too if no priming


Sent from my iPhone using Tapatalk

[MuZiZZle]

check the ball bearing doofer, then plug a laptop in, I fucked on for 2 weeks with sensors, clearing a fault code with a laptop fixed it

[PeterV10Vts]

I've tried that but the ecu plug in things won't pick up my car?