J4 breather O-rings

[Gandi699]

Anywhere you can buy these online? Need a couple - one for the cam cover breather elbow and one for the crankcase breather

[Liam_]

Are you talking about the metal elbows? If so, they don't have any sort of o-rings as standard.

If they're weeping, pop them out, clean them up, apply a small amount of something like Loctite 5699, and tap them back in with a small hammer. Worked fine for me.

[Gandi699]

they arent weeping but can be pulled entirely out quite easily! The breather elbow that goes to the inlet had a rubber o ring on it which has now snapped. Ive got some loctite so i'll try it cheers