Thermostst sandwich plate

[ldavies]

Hi guys since I've relocated my oil coolers my hoses are sitting pretty low so looked at my sandwich plate and I can move it a little more to the left so the hoses will be higher, shown in pic.
My question is as I didn't fit it I'm unsure how to spin it round a little.
Does the oil filter have to come off then it's a case of spin the sandwich plate round?
Thanks

http://i282.photobucket.com/albums/kk247/lee2806/A1EB5E30-E2FB-438E-94F9-B93FD55D9437_zpsnrdl3e4w.jpg (http://s282.photobucket.com/user/lee2806/media/A1EB5E30-E2FB-438E-94F9-B93FD55D9437_zpsnrdl3e4w.jpg.html)

[Alex]

Filter will need to come off, there will be a big bolt, m20 I think that you'd need to loosen.

[ldavies]

Filter will need to come off, there will be a big bolt, m20 I think that you'd need to loosen.

Thanks for the quick reply Alex 👍 will get it done :)
Doesn't look like it's going to spin a great deal but will be enough to give me a bit more clearance away from the ground that I will be happier with.
At the min it's sitting a lot lower than sump.

[Alex]

I know what you mean, I was farting around with mine for ages before I was happy with it.

[ldavies]

I know what you mean, I was farting around with mine for ages before I was happy with it.

Ha ha very true mate I've been messing with mine every week end now lol.
Sick of taking my bumper off now.

[Milney8989]

I put mine as far to the right possible! I havnt had any clearance issues!