interio loom removal engin bay advise needed asap

[DaCrazyOne]

So having got new loom .

Using the picture below where I circled in red does this need to be removed to get the loom though as finding it hard to have any movement.

The red circle round meaning to remove pump feeds and everything. to get access to back of it. one with the yellow box is removed but can this be broke down so wires only on it and can be fed though or small section need to be put though.?

http://puu.sh/gNH77.jpg

Does all the pump and parts need to be removed because cant get access to feeding loom though? Or is their a bracket that this fixes to being it that can be loosened off to gain access.

[Milney8989]

Yeah it needs to be removed is does brake down a fair bit to pull through

[DaCrazyOne]

SO the rez and pipes and I don't know what its called the big black thing needs to be removed?? grr half way their just got dashboard out and rest of it been doing parts with another guy whos doing all the electrical got engine bay done just the inside needs to be fitted now and part fed though for that fuse section.

Does that black thing have a brake that hold in place can move out the way or the whole lot got to come out

[DaCrazyOne]

New loom in woop woop all working central locking all doors locking alarm was a twat to pare up but now working. All need to do now is get new airbag coil for drivers wheel and job done all other lights off and even my fuel guadge and rear wiper and arm working again.

Looks like I won this round only small problems I need to fix now is lighting as seems dull on one side and move wires and goes bright again think contacts are fked or more going on.