Fia Cut off switch with toggle switch ignition and pushbutton start HELP!!!

[jimdavis3584]

Hopefully someone will be able to help me with this,

Im prepping my saxo for the track so keyed start is not an issue, what I want to do is wire in the 6way FIA kill switch with a toggle switch with led for the ignition and a push button starter.

I have been looking around the net and on here have found ways to wire in a push button start and a kill switch but nothing with how to wire all 3 together?

If anyone has any info or diagrams on how to do this it would be appreciated.

SAXO VTR phase 2 NFT engine
3 plug ecu

[axsaxoman]

if std ecu you will stil need to keep key next to transponder or the ecu will not turn on anyway --so why bother lot of work ofr no good purpose --the kill switch also has to be wired into the alternator to kill that charge as well or it will not stop when battery disconected an engine still running

[jimdavis3584]

Immobiliser system has be deactivated and removed, know how to wire in the fia kill switch but it's wiring all the components together ie kill switch toggle ignition led and push button start.

[axsaxoman]

if you can work that out --you should have no problem in workingout the wirirng on the std ig switch --thats simpler
presuming you have removed the steering lock and the switch assembly that attached to it