Grub screw size

[DaCrazyOne]

Anyone know what size this is because I do not have a measure to measure it with

http://puu.sh/miH7r.jpg
http://puu.sh/miHiU.jpg

Need to replace as they are beginning to get rounded off from having to adjust and refit due to coming lose.

Have come out of adjustable quickshift and keep on coming lose, guessing the screws that come with it are no good or not tight enough causing to wiggle about and come lose and having to tighten up again.

Any advise on size I know are 4mm Allen key

[elliotthorwood]

i believe the size is M5 x 6mm? i have a link to the ones i bought for mine a while back and fitted fine.

http://www.ebay.co.uk/itm/M5-x-6mm-A2-Stainless-Socket-Grub-Screws-CONE-POINT-Allen-10-Pack-/281457748457?hash=item41883069e9:g:CC8AAOxyXp5SOi0 i

:)

[DaCrazyOne]

i believe the size is M5 x 6mm? i have a link to the ones i bought for mine a while back and fitted fine.

http://www.ebay.co.uk/itm/M5-x-6mm-A2-Stainless-Socket-Grub-Screws-CONE-POINT-Allen-10-Pack-/281457748457?hash=item41883069e9:g:CC8AAOxyXp5SOi0 i

:)

perfect. SO guessing this is a common thing to happen with them to ware down and have to replace. Beginning to think is it rly worth the hassle lol

[stevo67]

If you can get some brass ones in this size it may solve your problem mate.

[DaCrazyOne]

Just ordered some of them so going to see how they work out and if needed ill grab some brass ones at later date or if push comes to shove if causes too much messing around going to convert it back to a stock one with different arm in it as beginning to be a pain in the ass this is just to have shorter shifts lol.

[Ben_SaxoForte]

maybe try some thread lock to stop them working loose

[DaCrazyOne]

Got the one sin link work bang on and got a bunch more for later use and my stick is beginning to look battered from setting up screwing up tightening and positing correctly lol