PDA

View Full Version : Sunroof


BlackandYellow
8th February 2016, 15:42
Has anyone tried to fix their sunroof in place and sealing it up completely? I was thinking if i take the mechanism out and weld it sup so it wont open and then when i put it back in replace all seals and then completely full up the gutter with black silicone. Would this work as i will never use it and still like the way it looks though? I would also take off the sunroof handle and filler in the hole and re spray it.

stevo67
8th February 2016, 22:13
Good luck getting a sunroof seal,and yes it's been done loads have a search.

BlackandYellow
8th February 2016, 22:16
are they hard to get then? i have 2 saxos both with sunroof so might take the other one out and use that

stevo67
8th February 2016, 23:30
Yes I don't think citroen stock them anymore.

ESD1711
9th February 2016, 06:57
Is this to fix a leak? Cos, even after silicon sealing alllllllll the way around mine in a bid to stop it leaking....... it still leaked.

BlackandYellow
9th February 2016, 18:20
no its just to stop it in the future, so would i be best to just leave it as standard and replace the seals?

martcambs
8th March 2016, 19:08
ive tried to seal mine aswell and it was a right pig used rtv silicone and guess what it still leaks.

BUMMERS
9th March 2016, 11:23
http://www.ebay.co.uk/itm/Peugeot-106-or-Citroen-Saxo-sunroof-seal-weatherstrip-water-leak-1996-On-NEW-/222038002594?hash=item33b27f0ba2:g:J9sAAOSwKtVW1DZ r

^that any good?

ESD1711
9th March 2016, 12:54
The problem you'll have is that if the 'basin' for want of a better word at the top of the sunroof drains corrodes, theres not a lot you can do that will stop it from leaking - correct way to fix / prevent that would be to examine and repair if needed any corrosion at the top of the drains, and that's easier said than done.

Gandi699
9th March 2016, 14:47
Its a silly design as the drains in the sunroof cassette dont actually sit at the lowest point they are a few mm about so water can pool and start to rot the it away.
The drains are also poor and can get blocked easily.
Cut the rust out and weld in new metal or just fibreglass over it