rocker gasket

[ratboy_vtr]

Hi all, would just like to know the best thing to use to clean the oil off when replacing the rocker gasket.

[VTR_Craig]

I used brake cleaner, they come in aerosol cans and it evaporates so you don't have to dry it after

[Synister]

Brake cleaner/carb cleaner on a rag. Or if that's not at hand just give it a good scrub with a rag.

[VeiRoN]

I used the WD-40 degreaser,leaves no residue as well.

[Shadowslayerzz]

I just use a rag and elbow grease mate :y:

[axsaxoman]

If you gto a leak --most probably cos the cover where the fixings are is bent down --so not aplying enough pressure to the gasket --never needed to change a vtr gasket --ever

alsways cover has been distorted at fixings cos spacers have been left out at some time

[stevo67]

Also the baffle plate gets distorted causing the rocker cover not to sit evenly.