DaCrazyOne
6th September 2016, 13:21
So I know this is simple enough to do. The top hinge has come off its weld to the door frame and needs to be welded.
What is down the wells inside. I need to know and how to remove to prepare for welding to reduce costs in labor so that can just take down and ready to weld hinge back on to frame.
The top L shape plate is flapping around and looking into it am guessing their is wires and door loom going though. Is their also a sun roof drain pip if so where is this located and how to remove it. Also seeing close to it is my indicator and also cables. Will I need to remove my front wing in order to access this and remove ro cable tie out the way.
Would it be advisable to remove inner fuse box and also rubbers that hold the wiring loom in place etc.
Some advise and guidance here as I not sure on all the stuff that is in it.
What is down the wells inside. I need to know and how to remove to prepare for welding to reduce costs in labor so that can just take down and ready to weld hinge back on to frame.
The top L shape plate is flapping around and looking into it am guessing their is wires and door loom going though. Is their also a sun roof drain pip if so where is this located and how to remove it. Also seeing close to it is my indicator and also cables. Will I need to remove my front wing in order to access this and remove ro cable tie out the way.
Would it be advisable to remove inner fuse box and also rubbers that hold the wiring loom in place etc.
Some advise and guidance here as I not sure on all the stuff that is in it.