VTS Lowering

[BobAB]

Im wantin to lower my vts. im getting -45mm eibach front springs and i want the torsion bar lowered 60mm but ive been told i can only get it either 1 notch (35mm) or 2 notchs (70mm). ive seen features on cars lowered 60mm at the back so how is this possible?

[Deano1983]

As far as i know this is correct, the torsion bar is on notchs so they get it as near as possible, if ur lowerin the front by 45mm y wud u want more at the back, surely that will look stuid??

[BobAB]

As far as i know this is correct, the torsion bar is on notchs so they get it as near as possible, if ur lowerin the front by 45mm y wud u want more at the back, surely that will look stuid??

it evens things up a bit gettin the back lower coz they sit higher at the back as standard

[richie_t]

You not buying shocks for the front too?

[Scott]

the back can be lowered to any height you want and avoid any place that says they lower by notches thats the wrong way to do it

[jonny_vts]

i got mine done to 60mm on the back no problem

[Deano1983]

Citreon told me it was on notchs but obvious;y i dint have it dont there (shitreon) lol!! Mines 50mm front so i dont know wot the backs lowered to!!

[BobAB]

the back can be lowered to any height you want and avoid any place that says they lower by notches thats the wrong way to do it

whats the proper way to do it?

[Deano1983]

Think theres a how to guide on it so it shud say in there then either do it ur sen or tell the peeps that r gonna do it to do it that way!!

[vtssaxo]

I have had my saxo lowered 40mm on the front and one notch lowered on the back!!! I have spoken to loads of people/companies and they have told me that one notch is -25mm. I am thinking off taking it down another notch (-50mm)but would it look stupid with 40mm on thwe front and 50mm on the back?

[Scott]

as i said notches is wrong!

www.badgermotorsport.com then go to technical

by doing it this correct way you can lower it to whatever you want