PDA

View Full Version : Chaning the time VTR

Johnno_Boy
28th October 2006, 17:03
any idea how to change the time on a vtr? clocks go back an hour dont they plus mine is wrong anyway! nice one
SlowOB
28th October 2006, 17:06
Lol!!

I always mess this up!

Have to just keep pressing the buttons hoping for the best!
Natalie
28th October 2006, 17:07
Turn the key until the ignition is on one click, then hold the second of the turny knob things in and it should start flashing so u can change it. Then just press it until the right time shows

Don't do it while the engine is on and lights are on or you'll just change the brightness of your dash lights lol
Easty
28th October 2006, 17:12
hold the second of the turny knob things

was going well up until then !
Natalie
28th October 2006, 17:30
was going well up until then !

Couldn't think of what else to call it :P

Well the one on the right anyway lol
James
28th October 2006, 17:31
I got an idea.. lets read the saxo manuel? :P
James
28th October 2006, 17:34
The digital clock can be set by turning the ignition on, without the engine started. By pressing the nozzle on the right for more than 3 seconds the hours will begin to flash. Press it again to change the hours.

If the hours is not changed for 5 seconds it will then move onto the minutes.. press and set your time.
Saxoladlesta
28th October 2006, 17:37
What he said ^^^
James
28th October 2006, 17:38
What he said ^^^

Post whore :fcuk:
davew
28th October 2006, 17:42
thought it was the left nozzle?

thought the right one dimmed the lights?
Karl
28th October 2006, 17:43
getcha Sax Owners manual out boyor
James
28th October 2006, 17:49
thought it was the left nozzle?

thought the right one dimmed the lights?

My manuel says right nozzle.. and manuels dont lie :P
Johnno_Boy
28th October 2006, 17:57
someone go try it is it i cba to go outside now lol
Karl
28th October 2006, 17:58
yeah but the manual also congratulates you on buying a Saxo ;)
Johnno_Boy
28th October 2006, 18:05
any luck??
tel
28th October 2006, 18:19
you know what ive had my sax for 3 years and up to reading this thread i didnt know the dash lights were dimmable on the mk2 lol

they say you learn something new everyday
Johnno
28th October 2006, 18:20
are they really???????? omg going to try that RIGHT now!
hesslevtr
28th October 2006, 18:23
are they really???????? omg going to try that RIGHT now!

simple things for simple minds
Johnno
28th October 2006, 18:33
BAD REP ON THE WAY.thanks.
hesslevtr
28th October 2006, 18:43
BAD REP ON THE WAY.thanks.

thats it life over i have bad rep
davew
28th October 2006, 18:50
maybye its only the vts that u can dim the dash lights on. . . . .
tel
28th October 2006, 19:25
mines a 1.1 and the lights dim so na they must work on anything
James
28th October 2006, 20:25
maybye its only the vts that u can dim the dash lights on. . . . .

Mines a VTR and mine does it.
Robbo
28th October 2006, 23:56
could dim them on my furio, and its right button
jonesyFX
29th October 2006, 09:07
ya see! i knew the big anologue clock on my 1.1 sax would be useful:oops:

easy peasy:)
Johnno_Boy
29th October 2006, 16:28
so has anyone managed to change the time or what?