not sure

[Saxo-Slag]

which section should be under. how do you get the jack under a lowered car.

[Clouds_mate]

how low are we talking?

I normally get someone to lift my car up from my archs and slide the jack under.

[Saxo-Slag]

cool. only thing is its me on my own.

[Clouds_mate]

How low is your car?

[Saxo-Slag]

sorted

[Scott]

just drive onto some bits of wood, i got some metal ramps made up that lift the car about 3 inches off the floor

[Saxo-Slag]

going to use flag stones to get lift

[R4T]

my m8 cant get his car motd for 80miles as no garage around here wil take on his car bcoz its a vtr lowered 70mm!

[DevilDamo]

Or... use the jack that comes up with the car to jack up the rear and then roll the other jack under the front jacking points. Something I have to do :-(

Edit...

wickedsaxo... There must be a garage that can get his car on a ramp. An MOT garage near me said they couldn't do the MOT because it was "too low" and I'm lowered 60mm. So I took the car to Citroen and they did it fine. The problem the MOT garages have is not the fact they can't get the car on the ramp but it's because when the car is up on a ramp, they have to run another horizontal jack from front to back to test the suspension struts, etc... and with a lot of lowered cars, this jack cannot get all the way under.

[Tupps]

If they cant get the car on the ramps its an instant fail isn't it?

Or have i been told utter bullshit

[srcnix]

Could grow some more arms, either that or have someone help you, as suggested.

[Clouds_mate]

Or... use the jack that comes up with the car to jack up the rear and then roll the other jack under the front jacking points. Something I have to do :-(

Edit...

wickedsaxo... There must be a garage that can get his car on a ramp. An MOT garage near me said they couldn't do the MOT because it was "too low" and I'm lowered 60mm. So I took the car to Citroen and they did it fine. The problem the MOT garages have is not the fact they can't get the car on the ramp but it's because when the car is up on a ramp, they have to run another horizontal jack from front to back to test the suspension struts, etc... and with a lot of lowered cars, this jack cannot get all the way under.

i was close to having problems with mine on the brake test for the rear.

[James]

i was close to having problems with mine on the brake test for the rear.

When i had my bodykit i did have problems.., they couldent get it in the hole on rear or front lol. In the end he told me to take a walk for 5 minutes while he used a tapping method or something *Shrugs*..

Passed and thats all that matters to me.