anyone with a mk2 silvertop vtr?

[custom_vtr]

wich members have got them? need to ask a question specific to this car

[hesslevtr]

i have 98bhp model

just ask the question anyway

[xclairex]

:P meee

[Pickles]

i have the earlier 90bhp silvertop 2000 W ask away

[custom_vtr]

right people,does the vacuum pipe for the brake servo go onto the top back side of the inlet manifold (side nearest the ecu). think this is where it goes onto but i'm sure the male connector on my inlet manifold has broke.just need to know before i start bodging it on lol

[xclairex]

right people,does the vacuum pipe for the brake servo go onto the top back side of the inlet manifold (side nearest the ecu). think this is where it goes onto but i'm sure the male connector on my inlet manifold has broke.just need to know before i start bodging it on lol

ermmm....


haha ill leave that 1 to the lads

[hesslevtr]

is this 98bhp model or 90bhp

any pics

[custom_vtr]

98bhp bud same as yours

[hesslevtr]

get me a pic

[custom_vtr]

cheers :Y:,sure you'd help mi if you could babe lol

[Pickles]

90bhp single plug ecu yes it does, to the left hand side underneath as you look at it

[Pickles]

should be the same on both as inlet manifolds are identical, have a feel if its busted you will feel a little hole where it was

[hesslevtr]

cheers :Y:,sure you'd help mi if you could babe lol

well if u hurry up i will bed soon

edit

pickles has i think

[Pickles]

what have i done

[hesslevtr]

what have i done

helped him

[custom_vtr]

lol, cant get a good pic as its on mobile at night.think its where you are on bout pickles,theres a hole where the male connector has snapped clean off and a small hole has been left. on the top rear of the manifold

[Pickles]

helped him


ah right lol:P

[Pickles]

lol, cant get a good pic as its on mobile at night.think its where you are on bout pickles,theres a hole where the male connector has snapped clean off right at the base. on the top rear of the manifold

thats the one mate, i would suggest replacing the inlet manifold as if it is bodged it may leak are into the servo and cause problems with your brakes also it will leak air into the inlet and the car will run like shite

[custom_vtr]

well i will do a proper job of it before i run it.just needed to know for deffo where it went as this was already snapped when i got the engine.i think i'll put a proper pipe on it before i used it too instead of the (quality) braided hose off the washing machine lol.cheers fellas,rep been given:Y:

[Pickles]

no proobs mate any time